User manual DOT HILL 2130 DATASHEET

[. . . ] 2130 · · · · · · · · · S P E C I F I C AT I O N S H E E T 2130 3. 5-inch drive JBOD Expansion Array Built in Redundancy · Redundant, hot swappable power units, IO modules, and fans make maintenance easy · Hot swappable drives Form Factor · 2 rackunit · Supports 3. 5 inch SAS, SATA, or SSD storage drives · 602mm depth · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · As your need for storage increases, Dot Hill provides an easy to deploy and cost effective way to extend your fibre channel, SAS or iSCSI SAN. [. . . ] The 2130 JBOD expansion unit can suppor t an additional 12 drives and easily expands the capacity of a customer's SAN. The 2130 JBOD array is controlled by the RAID controller of the primary unit and allows SAN expansion at a lower cost than a full RAID array. · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ª · Use With. . . The 2130 JBOD expansion units can be deployed with Dot Hill's 3. 5-inch RAID storage arrays: 2330 iSCSI Storage Array 2530 SAS Storage Array 2730 Fibre Channel Storage Array 2730T Fibre Channel Storage Array 5730 Fibre Channel Storage Array 2130 JBOD spec 2130 Specifications GENERAL ································································ SHOCK AND VIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shock, Operational Shock, Non-Operational Vibration, Operational Vibration, Non-Operational 5. 0G, 10ms, half sine 15G 11ms, half sine 0. 21Grms Random 5Hz to 500Hz flat spectrum/feed forward 0. 5G 1 octave/minute 5Hz to 500Hz to 5 Hz sine sweep 0. 5Grms Random 20Hz to-1000Hz flat spectrum ··································· Product Family Product Type Chassis Configuration Disk Architecture Max Drives per Chassis Total Disks Mounting Options Max Number of Chassis Max Capacity per Chassis 2000 Series JBOD 2U 3Gb SAS/3Gb SATA-II 12 drives 56 19" Rack, Telco Rack, Rack tray 5 (1 RAID and 4 JBOD) 24TB (2TB SATA-II drives) HIGH-AVAILABILITY FEATURES DRIVES ··································································· Max Number of Drives Drive Options 56 3Gb 3Gb 3Gb 3Gb 3Gb 3Gb 3Gb 3Gb SAS 146GB 15K RPM SAS 300GB 15K RPM SAS 450GB 15K RPM SATA-II 500GB 7200 RPM SATA-II 750GB 7200 RPM SATA-II 1TB 7200 RPM SATA-II 1TB 5400 RPM SATA-II 2TB 5400 RPM Redundant Hot-Swap Controllers Redundant Hot-Swap Disk Redundant Hot-Swap Fans Redundant Hot-Swap Power Dual Power Cords Hot Standby Spare Automatic Failover Yes Yes Yes Yes Yes Yes Yes RAID SUPPORT ························································ REGULATORY Safety ··························································· Levels Supported RAID Type Virtual disks per System Volumes per virtual disk Volumes per System Non-RAID, 0, 1, 3, 5, 6, 10, and 50 Hardware 32 128 256 UL 60950-1:2003 (USA) CAN/CSA-C22. 2 No. 60950-1-03 (Canada) EN 60950-1 :2001 + A11 (EU) IEC 60950-1 :2001 (International) CFR 47 Part 15 Subpart B (U. S. A. , Class A) ICES-003 Issue 4 (Canada, Class A) EN 55022 :98 +A1 +A2 (EU, Class A) EN61000-3-2:2000+A1, +A2, +A14 (Harmonics) EN 61000-3-3 :2001 (Flicker) EN 55024 :1998 +A1 (EU, Immunity) CISPR 22 :2005 (International, Class A) CISPR 24 :97 (International, Immunity) RoHS-5 Compliance , China RoHS, WEEE Australia/New Zealand, Canada, China (PRC), European Union (EU), Germany (GS Mark), Japan, South Korea, Taiwan, United States Electromagnetic Compatibility MANAGEMENT ························································· SAS connect to RAID POWER REQUIREMENTS - AC Input Power Requirements Max Input Power Heat Dissipation Voltage Max Input Power Heat Dissipation ···································· 100­240VAC, 50/60 Hz, 4. 5-1. 9A 475W maximum continuous 1622 BTU/hour ···································· POWER REQUIREMENTS - DC -39 to -72VDC, -48/-60V nominal 500W maximum continuous 1706 BTU/hour RoHS and WEEE Country Approvals TEMPERATURE AND HUMIDITY RANGES . . . . . . . . . . . . . . . . . . . Operating Temperature Shipping Temperature 41°F to 104°F (5°C to 40°C) -40°F to 158°F (-40°C to 70°C) Note: Derate 2°C for every km, up to 3000 meters 10% to 90% RH @ 104°F (40°C), non-condensing Up to 93% RH @ 104°F (40°C) non-condensing SUPPORT Operating Humidity Non-Operating Humidity Software Warranty Standard Hardware Warranty Environmental Monitoring Phone-home Capability Remote Diagnostics Non-disruptive Updates Non-disruptive Volume Expansion ······························································· · 90 days 3 years SNMP, CLI, RAIDar, SMTP Yes Yes Yes Yes for primary volumes and snapshot volumes DECLARED ACOUSTIC NOISE LEVELS . . . . . . . . . . . . . . . . . . . . . . . . Sound Power Sound Pressure <6. 03B Sound Power <55dBA Sound Pressure PHYSICAL ······························································· Height Depth (excluding cables) Width Chassis Weight Chassis (w/250GB drives) Weight 3. 5 Inches / 8. 9cm 23. 7 Inches / 60. 2cm 17. 6 Inches / 44. 7cm 44lbs. / 29. 48kg © 2009, Dot Hill Systems Corp. , All rights reserved. Dot Hill, the Dot Hill logo, the R/Evolution logo, R/Evolution, AssuredSnap, AssuredCopy, EcoStor and SimulCache are all trademarks of Dot Hill Systems Corp. This document is for informational purposes only, and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Dot Hill. Dot Hill reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its use. [. . . ] No part of this document may be copied or reproduced without written permission of Dot Hill Systems Corp. [. . . ]