User manual DRAPER 87962

[. . . ] Configure your secured network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 2 1. Safety instructions All safety and operating instructions should be read and understood before using the device, and should be kept for future reference. • • • • • • • • • • Never open the Homeplug adapter. [. . . ] Never set up the Homeplug adapter near a heater or radiator. The Homeplug adapter should be located only where sufficient ventilation according to the instructions of the manufacturer can be ensured. Disconnect the Homeplug adapter from the power supply grid before cleaning. Never use water, paint thinner, benzene, alcohol or other strong cleaning agents when cleaning the device, as these could damage the case. Never use the Homeplug adapter with a power supply that does not meet the specifications provided on the rating plate. If you do not know what type of power supply you have at home, contact your dealer or energy supplier. In the event of damage, disconnect the Homeplug adapter from the power supply grid and contact customer service. This applies, for example o if the power cable or plug is damaged o liquid has been spilled on the Homeplug adapter or objects have fallen into the device. o the Homeplug adapter has been exposed to rain or water. o the Homeplug adapter does not work, even though the operating instructions have been followed properly. o the Homeplug adapter’s case is damaged. • • Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 3 2. You’ll see this on the backside of the Homeplug. Plug the Ethernet cable in the Ethernet port on the master Homeplug. Connect the master Homeplug to your computer and plug it into the socket. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 9 5. 2 Install the Slave Homeplug Take the Homeplug which is labeled as ‘Slave’. You’ll see this on the backside of the Homeplug. Plug the Ethernet cable in the Ethernet port on the slave Homeplug. Connect the slave Homeplug to your Internet router and plug it into the socket. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 10 With the LN-509 you have the possibility to connect 3 devices simultaneously. Your network is now fully functional. Follow the next steps to secure your network. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 11 Install the software Note: If you use this manual to add a single Homeplug to an already existing Homeplug network, please follow the steps as described in Appendix A. Install the software only on the PC which is connected to the Master Homeplug. Insert the CD in the computer. Windows 7/Vista will prompt you to run CDMenu4. exe. The CD menu will start choose ‘Install utility’. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 12 Windows Vista/7 will ask permission to start the installation which looks similar to this image. Choose your language for installation. The WinPcap Installer will start, click Next. Click Next. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 13 Click, I agree. Click Install. Click Finish. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 14 The Homeplug Utility setup will start, click Next. Choose an installation folder or keep the default folder (recommended) and click Next. Click Next. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 15 The software will be installed on your computer. Click Close to finish the installation. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 16 6. Configure the network Start the software on the PC connected to the Master Homeplug by double clicking the Sitecom icon. Select the Homeplug in the ‘Powerline devices detected’ list and click ‘Enter Password’. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 17 A popup window appears. Please fill in the DAK code from the slave label in the password field and click ‘OK’. NOTE: the DAK code is case sensitive Select the ‘Privacy’ tab in the Homeplug utility. Fill in a chosen network name in the ‘Private Network Name’ field. Click ‘Set all devices’. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 18 A popup appears to inform you the network name has been changed. Your network type now has changed to ‘private’. Click ‘Close’ Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 19 7. [. . . ] Wait for the connection to complete. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 20 Appendix A: Add an extra Homeplug to an existing network 1. Install the Hardware Plug the Ethernet cable in the Ethernet port. Plug the cable into the device you want to connect to your network. Your network is now fully functional. Follow the next steps to secure your network. Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 21 2. Add a Slave Homeplug to a secured network Start the software on the PC connected to the Master Homeplug. Click ‘Add remote’ Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 22 A popup window appears. [. . . ]