Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DREMEL 2000 VERSATIP. We hope that this DREMEL 2000 VERSATIP user guide will be useful to you.
Lastmanuals help download the user guide DREMEL 2000 VERSATIP.
Detailed instructions for use are in the User's Guide.
[. . . ] Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. This enables better control of the tool in unexpected situations. There is a danger of burning yourself with the flame or with liquid soldering tin. [. . . ] Make sure the gas you are using is refined butane gas that can also be used in lighters. hold tool and container as shown in picture 8. Then fill the tank with liquid butane gas observing the instructions on the butane gas container. The tank is full when liquid butane gas escapes through the filling valve. The Dremel Versatip is equipped with a child safety mechanism. This mechanism requires two handed operation to protect against (accidental) ignition by children. When this is not the case, repeat steps 1 and 2. When the Dremel Versatip is cold, ignition might cause a short whistling sound. This is normal and does not mean there is something wrong with the tool. * Note: the flame guard must be installed correctly, for the tool to be able to ignite. When the ignition switch is released, the flow of gas is automatically shut off, causing the Dremel Versatip to stop and slowly cool down. to continuously operate the Dremel Versatip , follow the steps in figures 2 , 3 and 4. To switch the Dremel Versatip off, let go of the ignition switch and move the lock button to the right (figure 5). This will immediately stop the flow of butane gas. USING WITH AN OPEN FLAME To use the Dremel Versatip with an open flame, unscrew the flame guard, remove the catalyst (and tip if attached) and screw flame guard back onto the tool and securely tighten the flame guard nut. FLAME LENGTH AND TEMPERATURE ADJUSTMENT After ignition, make sure the tool is on by checking that the catalyst starts to glow. [. . . ] Shaping knife: cutting to size of sheets of plastic and other heat sensitive materials Wide flame head: preparing for detailed paint removal Hot air tip: melting of plastics and other heat-sensitive materials Deflector: shrinking of heat sensitive insulation around electrical wiring Switch the tool off and allow to fully cool down before cleaning. The exterior of the tool can be cleaned with a clean cloth. If necessary use a damp cloth with a small amount of neutral detergent. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DREMEL 2000 VERSATIP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DREMEL 2000 VERSATIP will begin.
