User manual DSC ESCORT 4580 V1.3

[. . . ] ® Escort4580 v1. 3 · Instruction Manual WARNING: This manual contains information on limitations regarding product use and unction and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment. This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. [. . . ] Secure {Partition X} before turning on. ' When the 'Secure system before turning on' message is heard, ensure that all zones on the partition are secure (close all doors and windows, stop motion in areas covered by motion detectors) before trying to arm the partition. e c t i o n 5 Stay Arming Stay Arming allows you to arm the system and remain on the premises. Stay arming also cancels the entry delay on the entry/exit doors. If the entry/exit door is opened, an alarm will sound immediately. When the system announces 'To Turn {Partition X} on Enter Your Access code' press [*]. The system will announce 'To turn {Partition X} on without entry delay press [9]' 2. The system will announce 'Enter Your Access Code' 3. The system will announce 'Turning {Partition X} on. Exit Delay in progress' The selected partition is now armed in the stay mode. Opening the entry/exit door will now sound an immediate alarm. 5 Disarming The System S IMPORTANT If you return to the premises and find that an alarm has occurred while you were away, it is possible that an intruder may still be on the premises. Go to the nearest telephone and contact the authorities. e c t i o n 6 Disarming the System To disarm your security system: 1. Access the security system using the steps described in the 'Accessing Your Security System' section of this manual. Select a partition to disarm as described in the 'Accessing Partitions' section of this manual. If the selected partition is armed, the system will announce '{Partition X} is on. To turn off, enter your Access Code' 3. The system will announce 'Turning {Partition X} off' If there were no alarms while the system was armed, the system will announce 'No alarm memory' When the system is disarmed, the Escort4580 may announce additional messages to advise you of the status of the system, or to allow you to select other partitions. 6 If An Alarm Sounds S Fire Alarm Your installer will tell you if fire detection equipment has been installed and activated on your system. If you hear a fire alarm, follow your emergency evacuation plan immediately. Refer to the guidelines for family escape planning at the back of this manual. e c t i o n 7 Intrusion Alarm Intrusion alarms sound with a continuous tone. If you have a PC4936 audio system connected to your security system, the Escort4580 will announce the zones which are in alarm over each intercom station. If you hear an intrusion alarm, an intruder may be on the premises. If you are certain that the premises are safe, you can silence the alarm from the telephone. Access the security system using the steps described in the 'Accessing Your Security System' and 'Accessing Partitions' sections of this manual. If the alarm was unintentional, notify your central station and/or the local authorities immediately to prevent an unnecessary response. [. . . ] If the laws of such a jurisdiction apply to any claim by or against DSC, the limitations and disclaimers contained here shall be to the greatest extent permitted by law. Some states do not allow the exclusion or limitation of incidental or consequential damages, so that the above may not apply to you. International Warranty The warranty for international customers is the same as for any customer within Canada and the United States, with the exception that Digital Security Controls Ltd. shall not be responsible for any customs fees, taxes, or VAT that may be due. Warranty Procedure To obtain service under this warranty, please return the item(s) in question to the point of purchase. All authorized distributors and dealers have a warranty program. [. . . ]