User manual DSC PC550

[. . . ] Instruction Manual PC55O With PC5OORK Keypad Industry Canada Notice NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. Industry Canada does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. [. . . ] This feature allows you to arm the system and remain on the premises. In addition, if any of the Entry-Exit doors are opened, an alarm will sound instantly. To use At-Home Arming, enter [ ][9][Access Code] on the keypad. The "Armed" light will FLASH to remind you that there is no Entry Delay on the Entry-Exit doors. Home-Away Arming Home-Away arming automatically bypasses the zones on your system programmed as Home Away with Delay, and applies the Entry Delay to the Entry-Exit zones. For example, you could use this feature to arm the system and remain on the premises. Another household member would still be able to enter the premises through the Entry-Exit door without causing an alarm. When the Entry-Exit door is opened, an Access Code would have to be entered to disarm the system. To arm the system with Home-Away Arming, enter an Access Code and do not open the Entry-Exit door. When the Exit Delay expires, the system will be armed with the Home-Away with Delay zones automatically bypassed. Your Installer will inform you of which zones on your system have been defined as "Home-Away with Delay" zones. Quick-Arm The Quick-Arm feature allows you to enter [ ][0] to arm the system. This command is designed to allow someone to arm the system without that person having to be provided with an Access Code. When [ ][0] is entered, the Exit Delay will begin and the user may leave the premises through the Entry-Exit door. At the end of the Exit Delay, the "Armed" light will come ON and the system will be fully armed. 6 PC500RK KEYPAD The "Ready" light will come ON when the system is ready to be armed. When the "Ready" light is OFF, there is an open zone on the system. The zone must be closed or bypassed before the system can be armed. The "Armed" light will come ON to indicate that the system is armed. The "Armed" light will FLASH to indicate that the system is armed and that there is no Entry Delay on any of the zones. The "System" light will come ON to indicate: · that zones are bypassed · there is a trouble condition on the system · there are alarms in memory. Use the [ ][1][Access Code] command to display the zones that have been bypassed; be sure that zones are intentionally bypassed before arming the system. Use the [ ][2] command to display any trouble conditions; be sure to have trouble conditions corrected by your installer as soon as possible. Use the [ ][3] command to Zone Lights 1 to 4 indicate zone activity. When a zone is secure, its Zone Light will be OFF; when a zone is open, its Zone Light will be ON. If a zone goes into alarm when the system is armed, the alarm will be indicated on the zone lights until the system is disarmed. 1 2 3 4 To View Bypassed Zones: Enter [ ][1][Access Code]. Press [#] to return to "Ready". [. . . ] · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/television technician for help. The user may find the following booklet prepared by the FCC useful: "How to Identify and Resolve Radio/Television Interference Problems". [. . . ]