User manual DUAL XD5220

[. . . ] · Snap trim ring into place. TYPICAL FRONT-LOAD DIN MOUNTING METHOD 2 XD5220 INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XD5220 uses one 5 amp AGC fuse (Battery) located in-line. * CAUTION - Do not attach any speaker leads to ground as severe damage will occur. 3 XD5220 OPERATION Control Locations 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 10 1 2 3 4 5 6 7 8 9 10 Release Power Volume Up/Down Audio Play/Pause Bass Boost/Mono/Stereo Tune/Track Up/Down Band Eject Mute 11 12 13 14 15 16 17 18 19 Auto Store/Preset Scan Display Scan Local/Distance Preset 6 Preset 5 Preset 4 Preset 3/CD Intro Preset 2/CD Random Preset 1/CD Repeat 20 4 XD5220 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. [. . . ] If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display. Press SCAN to preview strong stations on the current band, pausing for 5 seconds at each. Press LOC to activate local tuning for strong FM station reception only. Press LOC again to cancel and resume distance tuning (default). Press MO/ST for more than 2 seconds during FM tuner operation to select mono or stereo (default) reception of the broadcast signal. Press BAND to select between FM1, FM2, FM3 and AM1, AM2 bands. Press and hold BAND then press TUNE << to select European frequency spacing. Press and hold BAND then press TUNE >> to select U. S. Anytime frequency spacing is changed, all station presets are erased. Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button for more than 2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button. Press AS/PS for more than 2 seconds to automatically store the six strongest stations in the current band. [. . . ] A slight adjustment of any custom controls or connections discussed in your instruction booklet may save you a service call. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. Please describe your problem in writing and include your name, a return UPS shipping address (P. O. [. . . ]