User manual DUNE HD SMART D1

[. . . ] HDD player: connect an HDD to the player and play content directly from the HDD. Network player: connect the player to a local network and play content directly from PC or NAS (UPnP, SMB, NFS). MKV player: play HD and SD video in a popular MKV format and other modern video file formats, including top quality HD video with very high bitrate. RealD: watch 3D video in this ultra modern format used in cinema for the latest movies. [. . . ] Adjust the player settings as needed using "SETUP" item on the main screen of the player menu (or by pressing the "SETUP" RC button). in particular , you may want to adjust video settings , audio settings , and network settings. To choose the language of the player menu, use "Setup / General / Interface language" setting. Use the RC buttons "LEFT", "RIGHT", "UP", "DOWN", "ENTER", "RETURN" to navigate through the player menu. use the "MENU" RC button to show the list of available commands. Use the ''POP UP MENU'' RC button to show the information about the selected item. The "MODE" RC button allows quick setting of video output mode without entering the player setup menu. This way of video output configuration may be required if you see no picture on the screen after connecting your player to a TV. Press the "MODE" RC button and then one of the RC buttons "1", "2", "3", "4", or "5" to switch to one of the following video output modes respectively: 1. HDMI, 1080i, 60 Hz After you see a picture on the TV, press the "ENTER" RC button, and then go to the player setup menu to perform a more precise configuration of the video output mode if needed. NOTE: The procedure of quick setting of video output mode can not be used during playback. To ensure this procedure can be used, switch the player off, then switch the player on, and the wait about 1 minute to ensure the player loading is finished. To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive to an USB port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB drive on the main screen. When connecting a USB drive requiring significant power (such as USB HDD), use an external power supply for the USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive. Do not disconnect or switch off the USB drive when some write operation is in progress. To insert an SD memory card, ensure you are on the main screen of the player menu and insert the memory card into the SD card slot of the player. The player will recognize the memory card, and will show an item corresponding to the memory card on the main screen. Some SD memory cards may not be recognized by the player or may work incorrectly; in such a case, use other models of SD memory cards. Do not eject the SD memory card when some write operation is in progress. To connect an eSATA drive, switch off both the player and the eSATA drive, connect the eSATA drive to the eSATA port of the player (and connect the eSATA drive to its power supply), switch on the eSATA drive, and, as the last step, switch on the player. [. . . ] You can use a USB WiFi adapter to connect the player to the local network via WiFi. 5" SATA HDD may depend on your reseller. Please contact your local reseller for more information. Compatibility of the player with a particular hardware (A/V equipment, network equipment, disk drives, etc) may depend on various factors (particular hardware model, specifics of hardware installation and usage, configuration of the player and the hardware, etc). [. . . ]