User manual DURKOPP 745-34-3 BROCHURE

[. . . ] Nähanlagen mit CNC-Schrittmotortechnik zum Vornähen von geraden und schrägen Tascheneingriffen Sewing units with CNC step motor technology for runstitching of rectangular and slanted pocket openings Sewing units for piped pockets series 745-34-1 and 745-34-3 ­ for every working method the right sewing unit 745-34-1 A und 745-34-3 A ­ die Universellen ­ unschlagbar flexibel 745-34-1 A für rechtwinklige und 745-34-3 A für rechtwinklige und schräge Paspel- , Patten- und Leistentaschen mit manueller Zuführung der Paspelstreifen , Patten und der Beilegteile; 745-34-3 A mit vollautomatischer Pattenschrägen-Erkennung; mit automatischer Eckenmessereinstellung; optional mit Abstapelmöglichkeiten. [. . . ] Lining inside pockets with lining flap triangle and pocket bag, additional parts: piping strip, lining flap triangle, two pocket bag halfs 745-34-1 A/-3 A approx. Slant single- or double-piped pockets with flap and pocket bag in jackets (unicoloured), additional parts: flap, piping strip, pocket bag (not positioned over the flap) 745-34-3 A approx. Rectangular single- or double-piped pockets with flap and pocket bag in jackets (unicoloured), additional parts: flap, piping strip, pocket bag (not positioned over the flap) 745-34-1 A/-3 A approx. Breast welt pocket (patterned), additional parts: breast welts, pocket bag 745-34-3 D approx. Single- or double-piped pockets with flap and pocket bag in jackets (patterned), additional parts: flap, piping strip, one pocket bag (not positioned over the flap) 745-34-3 A approx. The indicated performance data are daily average values which can also be considerably higher depending on the processing method and the material preparation. The Dürkopp Adler spezialists will be pleased to advise you on the selection of the optimum machines for your application. Flaps, pocket bags, from the left Automatic loading device for e. [. . . ] more quality · Automatic flap slant scanning ­ no programming of pocket shapes necessary (only 745-34-3) · Fully overlapped working method by automatic feeding devices for flaps and other additional parts (only 745-34-3 B, 745-34-3 D and 745-34-3 F) · Large coloured graphic display with individually adaptable user interface, with symbols and explaining texts · 99 sewing programs and 20 sequences can be memorized; up to 8 programs can be stored in each sequence Automatic quick clamp adjustment for easy change from single-piped to double-piped pockets · condensed stitches or seam backtacking to be progammed for every needle optionally and individually · All pocket parameters are freely programmable Light weight to medium weight material Medium weight material Medium weight to heavy weight material Standard equipment Optional equipment Seam length depending on equipment Standard equipment; other needle distances available on request Mittenschneider mit Gegenmesser, separat elektromotorisch angetrieben Centre knife with counter knife, separately motordriven Fadenabschneider unter und über der Stichplatte Underbed thread trimmer and thread trimmer above the throat plate Nahtverriegelung, Reflexlichtschranke für automatisch automatischen Nähbeginn am Stoffanfang Reflecting light barrier for automatic sewing start at fabric beginning Subject to design changes · [. . . ]