User manual DURKOPP 911

[. . . ] 911 CNC-controlled sewing unit with large sewing area Operating Instructions Installation Instructions Service Instructions 1 2 3 Postfach 17 03 51, D-33703 Bielefeld Potsdamer Straße 190, D-33719 Bielefeld Telefon +49 (0) 5 21/ 59 25-00 Telefax +49 (0) 5 21/ 9 25 24 35 www. duerkopp-adler. com Ausgabe / Edition: 08/2010 Änderungsindex Rev. index: 00. 0 Printed in Federal Republic of Germany Teile-Nr. /Part. -No. : 0791 911001 All rights reserved. Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner, even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited. [. . . ] ­ Click File -> Delete The following screen will appear: ­ ­ Tip on the sewing program or sequence to be deleted. The program or the sequence will be deleted. 28 7. 7 Menu item "Edit" 7. 7. 1 Editing a sewing program A sewing program consists of a contour and sewing parameters. The contour (shape of seam) is created via Teach-in or with the help of the DA-CAD 5000. The program parameters are divided into different groups and are modified as follows: ­ Click Edit -> Seam program -> Parameters The following screen will appear: 1 PP1 - Configuration Seam name max. = 10. 0 mm ) Limits the programmable foot height to this value so that with thicker material only this value has to be adjusted. Adjust the thread tension (min. = 100%) The thread tension profile of the whole contour will be adjusted according to the percentage value. With the value 100% no adaptation takes place. = 100%) The run speeds will be adjusted accordingly. Clamp ID-Code Barcode (ID-Code) max. 10 characters for a security check before the sewing start (the optional equipment barcode reader has to be activated) 29 Laser marking lamps Up to four laser marking lamps can be triggered in order to facilitate the aligning of the material (The optional equipment has to be activated) Needle reverse turn mode The following modes can be set: Not active The needle remains in the stopping position. After the complete contour After the completion of all the seams of a contour the needle is turned back to the set value (MP parameter). After each seam (def. ) After each seam the needle will be turned back. Needle cooler (on/off) Activated/deactivates the needle cooler. = 100%) The sewing speed will be adjusted accordingly. PP2 - Load mode Feeding mode The following modes can be set: Mode 1 (def. ) The clamp will be opened in the feeding position. After actuating the pedal the clamp will be closed. After actuating the pedal one more time the seam will be started. Mode 2 The clamp will be opened in the feeding position. After actuating the pedal the left part of the two-piece clamp for an angular feed will be closed. After actuating the pedal one more time the right side will be closed. After a further actuation of the pedal the seam will be started. Mode 3 The clamp will be opened in the feeding position. After actuating the pedal the right part of the two-piece clamp for an angular feed will be closed. [. . . ] Change the bobbin Go to the point from where the sewing shall continue with the two buttons "forwards" or "backwards". Press the "Continue sewing " button. From this repair point the seam will be sewn to the seam end. 56 8. DA-CAD 5000 With the program DA-CAD 5000 that is optionally available, sewing programs can be created with an ordinary PC. For the exact description please read the "Instruction manual DA-CAD 5000". Selecting the machine class 1 In the first step the machine class is selected. Creating the seam contour In the second step the seam contour is drawn. 57 Memorizing the seam contour In the last step the finished seam program is copied onto a USB-stick. [. . . ]