User manual DXG DXG-321

[. . . ] Model 321 User's Manual 0 Table of Contents Chapter 1 Attention 1-1 1-2 1-3 1-4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Before Using Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operating Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 5. Preparing Your Camera 5-1 5-2 5-3 5-4 5-5 Attaching the Strap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Loading Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Loading and Removing the Memory Card. . . . . . . . . . . . 17 Setting Up the OSD Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setting Up the Date/Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Chapter 2. Getting to Know Your Camera 2-1 Features Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2-2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2-3 System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 6. Getting Started 6-1 6-2 6-3 6-4 6-5 6-6 Setup Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Record Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Play Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Movie Mode. . . . . . . . . . . [. . . ] First backup any important data stored in the memory card. Press the memory card down gently. There is 16MB internal flash memory built into the camera to store images If there is a memory card inserted, the card takes precedence. If you want to store image in the internal memory, simply remove the memory card. This camera uses SD or MMC memory available in various module sizes (4/8/16/32/64/128/256/512MB). The memory card won't fit if inserted the wrong direction. Avoid damage to the card by inserting gently. If the camera does not recognize the memory card, gently wipe the metal interface of the card with a soft cloth and reload the card. Make sure the memory card is in unlocked status. If it is The memory card will bounce upward. Pull the memory card out with your fingers as shown. locked, the LCD monitor will display and you will be unable to take a picture or play back images. 18 LCD monitor will display when no memory card is present. when memory LCD monitor will display card is loaded and working properly. In case the LCD with the card inserted, monitor still displays consider the following possible cause and solutions: -Image format can't be recognized by camera: Save image data to PC for backup, then format the memory card. -Memory card dirty: Use clean soft cloth to clean memory card and re-insert. -Memory card malfunction: Contact the memory card supplier for further assistance. -Card slot in camera malfunctions: Contact authorized dealer to request further assistance. date and time. 5-4 Setting Up the OSD Language Before using the camera, turn the Mode Dial to Setup Mode and then select "Language" to set the OSD language. There are 7 options for your selection: English, Chinese, French, German, Italian, Japanese, and Spanish. 5-5. Date/Time Before using the camera, turn the Mode Dial to Setup Mode and then select "Date/Time" to set the 19 Chapter 6: Getting Started 6-1 Setup Mode In Setup Mode, you can adjust the camera's basic functions, including Image Size, Image Quality, Self-timer, White Balance, EV Compensation, OSD Language, Date/Time, Preset Settings, Format Media, and TV-Out. The red LED will blink, and then the setup screen will show on the LCD monitor. Press the arrow button / on the Multi-Select Button to move and select the menu items. Press the arrow button to enter the selected menu items. Press the arrow button on the Multi-Select Button to return the previous menu. Shutter button down fully and you will hear two beep sounds, one low beep and one high beep. Hold the camera steady until after the two beeps. When taking a picture, you can press the Flash Button to set the desired flash modes: Auto, Red-eye reduction, and Off. [. . . ] Follow the installation Wizard to select a destination folder and components. 8. Select the program folder you want to install 9. When the installation is complete, the window below will appear. Click Finish to end the installation. 25 26 Chapter 8 File Transfers 8-1 How to Transfer Files Use the Mass Storage function in the PC Connection menu to connect and transfer files via USB. [. . . ]