User manual DYNASTY SPAS EXCALIBUR

[. . . ] Owner's Information Owner's Information Dealer Company Address Phone E-Mail Installer Company Address Phone Warranty Turned In / Date Model Serial Number Equipment Pack Color Date of Delivery We Appreciate your business and our sincere desire is that you receive years of pleasure and therapy from your Dynasty Spa. Please call your local Dynasty Spa Dealer if you have any questions or problems. If they are unavailable, please feel free to call the Dynasty Spas Customer Service Group at: 800-951-6224. TM Dynasty Spas Owner's Manual Dynasty Spas Owner's Manual Table Of Contents Owner's Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 3- Use Up and Down arrows to change 10:25 am 11:43 pm Step 4- Filter cycle frequency Setting filter cycle frequency: FF06 FF10 "xx" day. 1- Press Prog. 2- The display will show FFxx, with representing the frequency per Steps 2 & 3- Filter cycle start time & duration Steps 5 & 6- Economy mode start time & The system automatically performs two filter cycles per day, at 12-hour intervals. During the filter Setting Economy mode start time: cycle, Pumps 1 & 2 and the blower will run for one minute, then Pump 3 will run for one minute. Pump 1 will then run at low speed for a programmed 2- The display will show ESxx, with "xx" ES10 number of hours. The "Filter Cycle" icon lights up representing the starting hour. 3- Use Up and Down arrows to change ES08 setting. To program a filter cycle, you must enter: 1) the time you want the cycle to start and 2) the duration of the cycle. If no filtering is required, the duration Setting Economy mode duration: should be set to "0". For continuous filtering, the filter 1- Press Prog. cycle duration should be set to "12:00". 2- The display will show Edxx, with "xx" Ed04 representing the duration in hours. Setting filter cycle start time: 3- Use Up and Down arrows to change Ed06 setting. FS10 2- The display will show FSxx, with "xx" representing the starting hour. FS08 3- Use Up and Down arrows to change Step 7- Storing settings in setting. key a seventh time to store the settings in Setting filter cycle duration: the system's non-volatile memory and to return to Normal mode. Fd04 2- The display will show Fdxx, with "xx" representing the duration in hours. Fd06 3- Use Up and Down arrows to change setting. 16 5000 Top Side Control Instructions Digital control pad This function allows you to prevent unauthorized parameter setting of the unit. This feature is especially helpful when young children have access to the keypad. There are two modes you can choose from: Full lock or Partial lock. Full lock means that all keypad functions are locked. Partial lock means that the basic functions of the spa will remain accessi-ble (pumps, blower and light), but it will be impossible to change the temperature Set Point, to override the Economy mode or to enter the Programming mode. When control pad is locked, the "Lock" icon will be displayed. [. . . ] Prevents back flow of water through system. The digital panel that controls the spas functions. Power is distributed to all functions of the spa, pumps, corona discharge, heat, fiber optics, etc. The fitting set into the footwell that drains water from the spa. [. . . ]