User manual DYNATEK T-105

[. . . ] This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments. Connecting the water inlet hose • To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection. • To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C. Screw the hose to the tap as described for connection to a cold water supply. [. . . ] Com 8 Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. do not use table salt or industrial salt , or washing up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. Follow the instructions given on the packaging. Button repeatedly until the desired hardness level has been reached (1-2-3-4-5* see Water hardness table), up to a maximum of five levels. (The default water softener setting is level 3). - To exit the function, wait a few seconds or press one of the option buttons*, or switch off the machine using the ON/OFF button. Even if using multi-functional tablets, the salt dispenser should still be filled. EN If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights remain lit. 1 9 level 1 2 3 4 5* Rinse aid makes it easier for the crockery to dry, as water runs off surfaces more readily and therefore does not leave streaks or marks. Remove the funnel* and wipe any salt residue away from the opening; rinse the cap under running water and then screw it on, the head facing downwards so as to let the water flow out of the four cracks which are arranged in a star shape on the lower part of the cap. (Salt cap with green float*) It is advisable to perform this procedure every time you add salt to the container. Make sure the cap is screwed on tightly, so that no detergent can get into the container during the wash cycle (this could damage the water softener beyond repair). When necessary, measure out the salt before a wash cycle so that any saline solution which has leaked out of the salt dispenser is removed. measuring out the refined salt * Only available in selected models. 9 Care and maintenance EN • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. • The external surfaces of the machine and the control panel may be cleaned using a non-abrasive cloth which has been dampened with water. do not use solvents or abrasive products. • Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar. • Always keep the door of the appliance ajar in order to avoid moisture from forming and being trapped inside the machine. [. . . ] Make sure the water inlet filter has not become blocked by impurities (see “Care and maintenance” chapter). For at justere højden på de bageste ben, skal man dreje på den sekskantede, røde bøsning nederst på opvaskemaskinens front midt på ved hjælp af en 8 mm sekskantsnøgle. Drej højre om for at øge højden, og drej venstre om for at mindske højden. Øverste kurv Øverste spulearm Klapper Indstilling af kurven i højden Nederste kurv Nederste spulearm Kurv til bestik Filter Beholder til salt Rum til opvaskemiddel og rum til afspændingsmiddel Typeskilt Betjeningspanel *** Betjeningspanel Tast til programvalg Tasten ON-OFFRESET Display Tast og kontrollampe Start/Pause Tast til halv fyldning Tast til forsinket start Tast til Multitabletter Display Kontrollampe for opvask Kontrollampe for Mangel på afspændingsmiddel* Kontrollampe for tørring Programnummer Lysindikator for resterende tid Kontrollampe for saltmangel* Kontrollampe for halv fyldning Kontrollampe for forsinket start Kontrollampe for Multitabletter *** Kun på indbygningsmaskiner. [. . . ]