User manual DYSON DC 35

[. . . ] After registering your free 2 year guarantee, your Dyson vacuum cleaner will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions about your Dyson vacuum cleaner, call the Dyson Customer Care Helpline with your serial number and details of where/when you bought the vacuum. Your serial number can be found on your rating plate which is behind the filter. Most questions can be solved over the phone by one of our trained Dyson Customer Care Helpline staff. [. . . ] Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorhead and consulting with your flooring manufacturer. Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the Dyson vacuum cleaner or charger. This Dyson vacuum cleaner is fitted with a thermal cut-out. If any part of the Dyson vacuum cleaner becomes blocked the machine may overheat and automatically shut off. If this happens, switch `OFF' the Dyson vacuum cleaner and allow to cool before attempting to check the filter or for blockages. store the Dyson vacuum cleaner indoors. Do not use or store this Dyson vacuum cleaner below 3°C (37. Ensure that the Dyson vacuum cleaner is at room temperature before operating. Clearing blockages is not covered by your Dyson vacuum cleaner's limited guarantee. If any part of your Dyson vacuum cleaner becomes blocked, it may overheat and then automatically shut off. Switch `OFF' and unplug your Dyson vacuum cleaner and leave to cool down. Switch `OFF' the Dyson vacuum cleaner and disconnect from charger before clearing brush bar obstructions. failure to do so could result in personal injury. If your brush bar is obstructed, it may shut off. If this happens you will need to remove brush bar as shown and clear any obstructing debris. Remove the brush bar by using a coin to loosen the screw marked with a key. Ensure it is fixed firmly before operating the Dyson vacuum cleaner. Take care if coming into contact with the carbon fibre brushes, as they may cause minor skin irritation. Wash your hands after handling the brushes. beware of sharp objects when clearing blockages. Refit all parts of the vacuum cleaner securely before using. [. . . ] Too cold/too hot - do not use · Not charging - too cold/too hot Switch `OFF' the Dyson vacuum cleaner and disconnect from charger before emptying the clear bin. To make emptying the clear bin easier, it is advisable to remove the wand and motorhead. Empty as soon as the dirt reaches the level of the MAX mark ­ do not overfill. To release the dirt, push the red button at the side of the clear bin as shown. [. . . ]