User manual DYSON DC11 TELESCOPE

[. . . ] If the machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, contact the Dyson Helpline on 1- 866 - 693 - 9766. Do not pull or carry by the cord, do not use the cord as a handle, do not close a door on the cord or pull the cord around sharp edges or corners. Keep the cord away from heated surfaces and open flames. To unplug, grasp the plug, not the cord. Do not put any objects into openings in the machine. [. . . ] If it still does not fit, contact a qualified electrician to install the proper outlet. CAUTION • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Please note: • The machine is intended for domestic use only. • Fine dust such as plaster dust or flour should only be vacuumed in small amounts. 1 Using your DC11 Extend the cable fully up to the red tape. Press the on/off button to start or stop the machine. To adjust the wand length, press catch 1 to slide the handle in or out. The floor tools fit into the end of the wand, the wand handle or the hose. Empty the clear bins as soon as either one reaches the max mark (see page 9). TM 5 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 6 Using your DC11 The tools clean upholstery, curtains and stairs. The tools fit the wand, wand handle and hose. Hold the cable rewind button down to rewind the cable. CAUTION • Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding. 6 Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 7 Using your tools 1 2 clean air turbine head bare floor tool mini turbine head Using your tools Clean air turbine head When you start the machine the Turbine head is already in carpet mode. For bare floors, press in the button to turn the brushbar off. To return to carpet mode, pull out the button or turn the machine off. Optional Bare floor tool Cleans bare floors gently. Optional Mini turbine head Cleans hair from confined spaces such as the car. 1 Attach the enclosed adapter to the Mini turbine head. 2 Attach the complete tool to the end of the wand. 7 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 8 Carrying your DC11 Carrying your DC11 Crevice tool Reaches into nooks and crannies. For loose fabrics pull the trigger and hold it to reduce suction. For your safety do not press the cyclone release catch when carrying your machine. CAUTION • Do not shake the machine when carrying. • Ensure the cyclone pack and wand handle are firmly secured to the base. • Ensure the hose has clicked into place on both sides. 8 Dyson Helpline contact us on 1-866-693-9766 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 9 Emptying your DC11 2 1 Emptying your DC11 CAUTION • Disconnect the machine from the electrical outlet before emptying the bin. Failure to do so could result in electric shock or personal injury. [. . . ] CAUTION • Make sure all parts have been replaced securely before using your machine. 13 11323_DC11_USA_OWNER_MAN. qxd p1 9/23/04 2:43 PM Page 14 Blockages 1 1 2 2 1 3 3 4 4 5 5 Clean air turbine head Press catch 1 to release cyclone pack. Check whether the filter and case need washing. 3 Remove the brushbar and clear away thread and hair. 5 To re-assemble, align the arrows on each brushbar in the same direction, click and fasten the soleplate into place. 14 Mini turbine head 1 Release the catches. [. . . ]