User manual DYSON DC23 MULTIFLOOR

[. . . ] OPERATING MANUAL GUIDE D’UTILISATION ASSEMBLY • ASSEMBLAGE 1 2 4 clik WASH FILTER Wash filter with cold water at least every 3 months. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: Do not leave the Dyson vacuum cleaner when plugged in. Unplug from outlet when not in use and before servicing. Close attention is necessary when used by or near children. [. . . ] € Do not use any lubricants, cleaning agents, polishes or air fresheners on any part of the appliance. Looking for blockages • Switch ‘OFF’ and unplug the vacuum cleaner before checking for blockages. failure to do so could result in personal injury. € Please ensure the vacuum cleaner is upright and switched off before removing hose or airway inspection parts. • Beware of sharp objects when clearing blockages. € Refit all parts of the vacuum cleaner securely before using. € Clearing blockages is not covered by your vacuum cleaner’s limited warranty. If any part of your vacuum cleaner becomes blocked, it may overheat and then automatically shut off. Unplug the vacuum cleaner and leave to cool down. € Large items may block the tools or wand inlet, if this happens switch the vacuum cleaner off and unplug the vacuum before removing the blockage. Caution: Caution: Please note: Please note: 2 1 3 Emptying THE Clear bin • Switch ‘OFF’ and unplug the vacuum cleaner before emptying the clear bin. € Empty as soon as the dirt reaches the level of the MAX mark – do not overfill. To remove the clear bin from the vacuum cleaner press the button at rear of cyclone carrying handle. To release the dirt, press the red clear bin release button. € Do not use the vacuum cleaner without the clear bin in place. € To minimize dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty. Remove the clear bin carefully and seal bag tightly, dispose as normal. Caution: Please note: cleaning THE Clear bin • Do not immerse the whole cyclone in water or pour water into the cyclones. € Ensure the clear bin is completely dry before replacing. € Clean the shroud with a cloth or dry brush to remove lint and dust. €  o not use detergents, polishes or air fresheners to clean the clear bin. D • Do not put clear bin in a dishwasher. [. . . ] Use of parts and accessories other than those produced or recommended by Dyson Canada Limited. Normal wear and tear, including normal wearing parts such as clear bin, belt, filter, hose assembly, and power cord (or where external damage or abuse is diagnosed). Use of parts and accessories other than those produced or recommended by Dyson Canada Limited. WHAT IS NOT COVERED • Please fill out and return the Warranty Form, or register online at: www. [. . . ]