Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual E-TEN M500. We hope that this E-TEN M500 user guide will be useful to you.
Lastmanuals help download the user guide E-TEN M500.
Detailed instructions for use are in the User's Guide.
[. . . ] Personal computer side:
(1)
Use the Internet to download and install the PC driver program. Refer to the documentation and screen instructions to establish a new connection.
(2)
Click
, Settings, Control Panel, and then Network and Dial-up
Connections.
(3)
Look for the new connection you just established and click the right mouse button. Then, run Dial on the pop-up menu to connect successfully.
1
(4)
End the ActiveSync connection between the personal computer (desktop or notebook) and the Pocket PC. [. . . ] Select a virtual COM port, it is prepared for the Infrared port.
4
Refer to the following explanation to set up. Click , Settings,
Control Panel, and then Wireless Link.
2. Select the Image Transfer tab, confirm not to check "Use Wireless Link to transfer images from a digital camera to your computer. "
5
Refer to the following explanation to set up a virtual modem. Click , Settings,
Control Panel, and then Phone and Modem Options. Select the Modems tab and then click Add to add a new virtual modem.
3. Check "Don't detect my modem; I will select it from a list, " and then click Next.
4. Select "Standard 33600 bps Modem, " and then click Next.
6
5. Select the same COM port you selected earlier using the IrCOMM2k setup program, and then click Next.
6. You have set up a virtual modem successfully.
7
Refer to the following explanation to set up properties of the virtual modem. Click , Settings,
Control Panel, and then Phone and Modem Options. Select the Modems tab and select the virtual modem you have just set up, and then click Properties. Select the Advanced tab and input "AT+CGDCONT=1, "I P", "APN", "", 0, 0". Change the "APN" to the name specified by your telecom company. Finally, click OK to complete and exit Phone and Modem Options.
8
Refer to the following explanation to establish a new connection. Click , Settings,
Control Panel, Network and Dial-up Connections, and then Make New Connection. Select "Dial-up to the Internet, " and then click Next.
4. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN), " and then click Next.
9
5. Select "I connect through a phone line and a modem, " and then click Next.
6. [. . . ] Do not check the following items:
Enable hardware flow control Enable modem error control Enable modem compression Enable modem speaker
Finally click OK to save. Select the Networking tab and confirm that you have selected "Internet Protocol (TCP/IP), " and click Properties.
6. Do not check "Use IP Header compression. " 8. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE E-TEN M500
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual E-TEN M500 will begin.
