User manual E-TEN X500

[. . . ] GPS Pocket PC User Manual Safety Instructions Please Read Before Proceeding. This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. Before you install the SIM card, make sure that tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC's mobile phone, Bluetooth, and wireless LAN functions. [. . . ] As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item. In the Wireless Manager main menu, select to enter the WLAN Utility screen. Then select the Configurate Button to enter the WLAN setup screen. Using Wireless LAN 8-5 7. Select name of a currently available network to enter the WLAN authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. Authentication: Select Open Data Encryption: Select WEP to enable the entry bar about Network key Network key Network index 9. Tap and hold on the name of the network connection that you can currently use, then select Connect. When the icon appears on the top of the screen, your wireless network has been successfully connected. 8-6 Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company's network administrator. If your company's networking environment doesn't need Proxy server settings, please close the proxy connection. Tap , Settings, the Connections tab, Connections, and then the Tasks tab. When your Pocket PC fails to automatically detect or connect to a usable wireless network, please try using the manual method to configure your network settings. Please refer to the settings information in this section. Select "Setup my proxy server" or "Edit my proxy server, " as shown on the left. In the Proxy Settings tab screen, make sure that the following items have been checked: This network connects to the Internet This network uses a proxy server to connect to the Internet Using Wireless LAN 8-7 The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named "This network connects to the Internet" and skip the following procedures. Enter the name into the "Proxy server" field. Select the Advanced button and enter the advanced settings screen. You can modify the settings by tapping the HTTP type. 6. Enter the number into the "Port" field. Finally, tap to save and exit. 8-8 9 Sending and Receiving Messages / Tap and then Messaging. Tap to select an account. [. . . ] You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen. Try and change them so that you can read more smoothly. The contact point of my stylus is not quite precise. [. . . ]