User manual EAGLE JOURNEY AND STATUS INSTALLATION NOTES

[. . . ] Journey and TM Status TM INSTALLATION AND OPERATION INSTRUCTIONS Copyright © 2000 Eagle Electronics. StatusTM and JourneyTM are trademarks of Eagle Electronics. USE THIS UNIT ONLY AS AN AID TO NAVIGATION. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. [. . . ] Now highlight the "DELETE ALL WPTS" label and press the right arrow key. The unit removes all waypoints from memory. Note: This also removes all routes from memory. Move a Waypoint You can move all information from one waypoint number to another to help organize the waypoints. In this example, we'll move all of the information in waypoint number 1 to waypoint number 9. To do this, highlight the "MOVE WAYPOINT" on the waypoint screen and press the right arrow key. The "From" label is highlighted at the top of the screen. Press the right arrow key until the waypoint number that you want to move appears. In this example, we selected waypoint number 1. Now press the down arrow key once to highlight the "To" label. Press the left or right arrow key until the number that you want to move the waypoint to appears. Again, in this example, we chose to move waypoint number 1 to waypoint number 9, so we pressed the right arrow key until "9" appeared. As you can see on the screen above, waypoint number 1 is showing in the "From" box. The "From" box is now empty and the "To" box has waypoint number 9. Waypoint Options You can customize the method used to show a waypoint on the map screens. To do this, first press the MENU key, then select "MAP SETUP", finally select "WAYPOINT OPTIONS". You can turn all of the waypoints, their symbols, names, or numbers on or off. Simply select the desired label, then press the appropriate arrow key. Press the EXIT key to erase this menu. 41 WAYPOINT NAVIGATION This unit makes it easy to navigate to any waypoint. All you have to do is select the waypoint, then highlight the "GO TO WAYPOINT" label on the waypoint screen and press the right arrow key. The unit immediately shows navigation information to the waypoint on all navigation, map, and windows screens. In this example, the waypoint named "BIG FISH" (# 5) was recalled. Switching to the MAP-1 screen (shown at right) shows the starting location "S", the recalled waypoint "4", the plot trail from the starting location to the present position, and the present position. [. . . ] Please follow the shipping instructions shown below on this page if you have to mail your unit to the dealer. For proper testing, repair, and service, send a brief note with the product describing the problem. Be sure to include your name, return shipping address, and a daytime telephone number. Shipping Information When sending a product for repair, we recommend you do the following: 1. Always use the original shipping container and filler material the product was packed in when shipping your product. [. . . ]