User manual EBENCH KH 2329

[. . . ] Tell children about the appliance and its potential dangers so that they do not play with it. Technical Data This appliance has been inspected and approved in reference to its conformity with the principal requirements and relevant regulations contained in the EMC Directive, 2004/108/EG, as well as the Directive for Low Voltage Appliances, 2006/95/EG. Power supply: Power consumption: Frequency range: Amplifier gain: Output voltage: Protection class: Dimensions: Weight: Operating temperature: Operational humidity: 230­240 V/50Hz 3, 5 Watt 40­860 MHz UHF: 28 dB VHF: 26 dB max. 100 dBV (variable) II, 19, 5 x 14, 5 x 22, 5 cm 535 g 10° C + 40° C 0 % ­80 % (no condensation) Important Instructions for your Safety! To avoid life-threatening electric shocks: · Ensure that the electrical specifications given on the model plate tally with the rating of the existing domestic electricity supply. [. . . ] Connect the Adapter Coaxial socket/Coaxial socket 8 with the antenna cable. Connect the anntenna cable with Adapter Coaxial socket/Coaxial socket 8 to the 75 Ohm connector on your stereo system. To orient the indoor antenna: Pull out both telescopic antenna 1 and adjust these until the best reception is obtained. Adjust the oval antenna 2 by turning or tilting until the best reception is obtained. Switching On and Regulating the Amplifier Connection to a DVB-T receiver To connect the room antenna to a DVB-TReceiver with an F-socket, the Adapter F-Plug/ Coaxial socket 7 must be used. Connect the Adapter F-Plug/Coaxial socket 7 with the antenna cable. Screw the antenna cable with the Adapter F-Plug/Coaxial socket 7 to the F-socket of the DVB-T-Receivers. You can regulate the amplifier gain by turning the regulator 4 on the front of the appliance: Switch on the indoor antenna by turning the regulator 4 to the right. Turn the regulator 4 in clockwise direction to increase the amplifier gain. Turn the regulator 4 in anti-clockwise direction to decrease the amplifier gain. Turn the regulator 4 completely to the left until it clicks to switch off the indoor antenna. -3- What to Do in the Event of Reception Problems Reception disruptions, such as an unclear or distorted picture could have the following causes: · The indoor antenna is not correctly oriented. Every station requires an individual orientation. For this reason, reorient the indoor antenna every time after changing the station. · There are obstacles in the reception range of the indoor antenna. Attempt to remove the obstructions or place the antenna at a different location. · There is electromagnetic interference in the immediate vicinity. Try to eliminate the interference if, for example, it is caused by other appliances (mobile telephone, micro-wave, etc. ). · Interference due to overmodulation. Try to eliminate the interference by reducing the amplifier gain by turning the regulator 4 anti-clockwise. The reception characteristics of the indoor antenna are only good if you are close enough to the broad-casting station. Cleaning and Care Risk of electric shock · · Before cleaning, always pull the plug out of the plug socket. [. . . ] The warranty covers only claims for material and manufacturing defects, not for wearing parts or for damage to fragile components. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]