User manual ECLIPSE 508

[. . . ] Retain instructions The safety and operating instructions should be retained for future reference. Warnings All warnings on the unit and in the operating instructions should be adhered to. Power supply Power supply should be operated only from the power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 6. General care of unit Do not open or modify the unit as fire or electric shock may result. [. . . ] Do not place the unit in locations exposed to cold air or direct draft. Condensation, leakage current or thermal damage may result. Do not use the unit in dusty or dirty locations. Decreased heat ventilation can cause thermal damage 8. Unit heat The bottom and sides of the unit can heat up during use and should not be touched. Only connect or disconnect speaker cables after the power supply has cooled down. Moving the unit When moving the unit, shut off power to all connected equipment, and disconnect power cords, connectoins cables, speaker cables and other wires. Moving the unit while cable are connected can cause damage to cables, fire or electric shock. The unit is heavy and care should be taken when unpacking, moving or lifting. Manufacturing also creates sharp areas on the unit; use thorough care in handling. Power cord Only use the power cord supplied and do not bend, twist, modify it for repair, or pin it under the unit. Extended non-use If the unit is likely to be unused for an extended period, shut off power and disconnect from power supply. 17. Volume Adjustment If abnormal noise is produced during play at high volume, reduce the volume level. Distorted sound can cause overheating of speakers and amplifier. Before switching power supply on, set the amplifier volume to minimum. Sudden, loud noise can cause damage to hearing. Connecting TV/other audio equipment When connecting a TV or other audio equipment, always shut off power, read the operating manual for each device and follow the instructions for connection. Use of non-designated cables or extension cables can cause heat production, burns, and fire. Antenna An outdoor antenna should be located away from power lines. Before undertaking maintenance disconnect from power supply. Have the interior of the unit cleaned approximately once a year by qualified personnel. Accumulated dust inside and long intervals without cleaning can cause fire or malfunction. [. . . ] In such cases, press the power button to turn the power off and then back on again, and check if this product is working normally. Notes on Use Volume Setting Before switching ON minimise the volume. Sudden, large output can damage the speakers. Volume Etiquette To avoid disturbance in your neighbourhood, enjoy your unit at an appropriate volume. Remember that at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment. Speaker Cord Connection Always connect speaker systems with power OFF. [. . . ]