User manual ECLIPSE A502

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read instructions All safety and operating instructions should be read before operating unit. shock may result. Do not place flower vases, potted plants, cups, cosmetics, drugs, containers holding liquids, or small metal objects on or near the unit. Do not place any objects on the unit and do not insert or drop metal, combustible objects or liquids into the unit as such actions can cause fire or electric shock. [. . . ] When disconnecting the power cord from an outlet, do not pull the cord. Pulling on the cord can damage it and cause fire or electric shock. Do not touch the power cord with wet hands. Do not place the power cord near heating equipment and do not use the unit. If the plug fits loosely in an electric outlet or the plug or cord is hot. If the cord is damaged, replace it as continued use may result in fire or electric shock. Unit plug Insert the plug into an outlet all the way to its base. Incomplete insertion can cause heat production, and dust build-up can cause fire. Contact with the prongs of the plug can also cause electric shock. Do not connect the unit to an outlet where the connection is loose even when the plug is inserted all the way to its base. If dust or metal accumulates on or near the prongs of the plug, wipe the plug with a dry cloth after disconnection. Continued use may cause fire or electric shock. Danger signs If you notice a strange noise, smoke, unusual odour or other abnormal condition, shut off the unit, disconnect the power cord from the outlet and have the unit inspected. Continued use may result in fire or electric shock. Electric storms During electrical storms disconnect the unit and avoid contact with the antenna and power cord. Lightning can cause fire, electric shock, and malfunction. Internal temperature rise To avoid internal temperature rise when installing the unit, leave space between the unit and walls or other equipment. When installed in a rack or similar fixture, leave a 10cm (4") or larger gap on top and at sides since internal temperature rise can result in fire. The unit is provided with ventilation holes to prevent internal temperature rise. Blockage of these holes decreases ventilation and can result in fire. Do not place the unit in a poorly ventilated area Do not place the unit on carpeting or on bedding Do not obstruct the ventilation holes Do not tilt the unit or turn upside down 15. Extended non-use If the unit is likely to be unused for an extended period, shut off power and disconnect from power supply. [. . . ] Remember that at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment. Volume knob Attach the volume knob to the amplifier as shown in the following figure. Speaker Cord Connection Always connect speaker systems with power OFF. If a speaker cable is inadvertently shorted, the protection circuit in the amplifier will operate, and audio output will stop temporarily. In this event, disconnect the power cord from the outlet, correct the shorted area and reconnect the power cord to the outlet. 6 Part Names and Functions/Connections Volume knob Turn to the right Increases volume Decreases volume Turn to the left Amplifier Power supply Power indicator Power button "ON" indicator lights Power button "OFF" Power button Turns the power supply ON/OFF Line input terminal R Connect to audio source using cable with RCA pin jack. Line input terminal L Connect to audio source using cable with RCA pin jack. Power cord Connect the plug of the power cord to a power supply socket. [. . . ]