User manual ECLIPSE D6

[. . . ] JAPANESE ENGLISH SPEAKER STAND TD508 speaker only SPEAKER STAND TD510 speaker only GERMAN OWNER'S MANUAL Thank you for purchasing this high quality speaker stand. Please read this installation manual before assembling the stand, and be sure to use it properly. [. . . ] Be especially · Assemble the stand on a level surface. Placing the stand on an uneven surface can lead to overturning and result in an injury. · Do not place the stand where people regularly move past it. Bumping into the stand can cause an injury. · Place the stand on a solid and level floor. Installing the stand in a location that is unstable can cause it to fall and result in an injury. careful about children trying to do this. If the stand falls over it can cause an injury. Do not use the stand for other purposes. Improper use of the stand can result in an unstable condition with the potential to cause an injury by falling. FRENCH ITALIAN SPANISH · The stand is heavy, so be sure 2 or more people cooperate in unpacking or moving it. Improper lifting can cause a back injury and dropping the stand can injure feet. Cautions before use · · · · · This is a stand for a speaker system. Avoid using the stand for other purposes. [. . . ] Insert the speaker into the joint, adjust it to the preferred angle, and then tighten the washer and angle adjustment screw to secure it in that position. 8 Hexagonal nut Washer Angle adjustment screw 9 Insulator 8 Hexagonal nut 4 7 Spike 7 Spike 9 Insulator · The speaker is heavy, so lie it on the floor and place your hands around it when installing it. · Lay a soft cloth or similar on the floor to prevent any damage to the speaker and the floor while working. -6- JAPANESE - Routing speaker wire 1 When connecting the speaker wire, connect it securely so that the end of the speaker wire does not touch any neighboring terminals. ENGLISH Speaker Wire Speaker Wire GERMAN - Speaker angle adjustment 1 Loosen the angle adjustment screw on the right side of the speaker. FRENCH 2 Slide the speaker to the right slightly to disengage the tab of the joint. Speaker Angle adjustment screw Joint 6 Allen key ITALIAN 3 4 Adjust the speaker to the desired angle. SPANISH 1 forward step 2 backward steps Securely tighten the angle adjustment screw. Tip · Hold the speaker securely while adjusting the angle. -7- JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH -8- [. . . ]