User manual ECLIPSE TD501II

[. . . ] If internal inspection, adjustment or repairs are required, please consult Fujitsu Ten. This can lead to fire or electric shock. Do not use the amplifier in a bathroom, anywhere where it will be exposed to rain, or in an environment with high humidity. This can lead to fire or electric shock. [. . . ] The amplifier may fall, leading to injuries or product failure. Do not place the amplifier in a location where it will be exposed to oil smoke or water vapor, such as next to a kitchen table or humidifier. Do not place the amplifier in a location where it is struck directly by a cool air stream. This can lead to condensation, current leakage or burning. Do not place the amplifier in a location where it is exposed to direct sunlight for long periods of time or close to heating equipment. This can lead to deformation or discoloration of the cabinet, or to fire. Do not place the amplifier in any extremely cold location. This can lead to product failure or accidents. Do not place the amplifier close to naked flame. This can lead to product failure or accidents. If there is any radio interference due, for example, to proximity to a tuner, install the tuber and amplifier at a greater distance from each other. Before moving the amplifier, first switch off the power supply to the connected devices and disconnect the power supply cable, the connecting cables to each device, the speaker cables, and so on. If you move the amplifier with the cables connected, a cable could be damaged, leading to fire or electric shock. Before cleaning/caring for the product, be sure to switch off the power supply and remove the power cable plug from the power outlet. Otherwise you could sustain an electric shock or injuries. If you do not use the amplifier for a long time, for example when you are on vacation, for the sake of safety always switch off the power supply and remove the power cable plug from the power outlet. Otherwise there will be a danger of fire. Before connecting a TV or any other audio device, be sure to switch off the power supply, carefully read the instruction manuals of the devices involved, and make the connections in accordance with the directions in these manuals. Before turning on the power, make sure that the volumes of the subwoofer and the amplifier are set to minimum. Otherwise a very loud noise could suddenly be generated, causing hearing impairment or other problems. If you hear an abnormal sound while the audio equipment is operating at a high volume, turn the volume down. If you continue to use the amplifier at the high volume, or use it for a long time while it is producing distorted sound, the speaker will heat up, and this could lead to fire. ENGLISH - 14 - Precautions on Use Before turning the power on, and before switching inputs, always set the volume to minimum. [. . . ] WEEE : Waste Electrical and Electronic Equipment. - 19 - Warranty (appended) Read the warranty carefully and then keep it in a safe place. Term of the warranty The term is one year from the date of purchase. Note that charges may be made even during the warranty term: read the warranty carefully. When repairs are requested [During the warranty term] Please submit the warranty certificate when requesting repairs. We will repair the product in accordance with the stipulations on the warranty. [. . . ]