User manual ECLIPSE TD508II

[. . . ] Keep this Owner's Manual together with the Warranty Certificate in a safe place for later reference. Foreword Contents Using the Product Safely and Correctly Precautions on Use Name and Function of Each Part, and Connection Adjusting the Angle of the Speaker Fitting the Protective Mesh Care / Specifications Warranty and After Service 13 14 15 16 18 19 20 Accessories speaker x 1 Hexagonal wrench x 1 Eclipse TD logo sticker x 1 Protective cover x 1 Owner's Manual x 1 Warranty Certificate This product is a speaker which has been designed using Time Domain theory. Time domain recreates the changes that occur in sound waves over time from the moment of output until their disappearance. [. . . ] Sudden bursts of loud noise may cause damage to any connected speaker systems. To avoid disturbance in your neighborhood, enjoy your unit at an appropriate volume. Remember that particularly at night, even low volumes carry well into surrounding areas. Help to maintain a pleasant living environment. Always connect speaker with the power disconnected. If the unit becomes dirty, use detergent on a soft cloth to wipe it down. Do not use thinners or gasoline. Name and Function of Each Part, and Connection The illustrations in this instruction manual show the TD510, but all the functions are shared with the TD508II. Speaker cable Speaker Input Terminals Insert the ends of the speaker wires into the holes in the speaker input terminals and tighten the terminals. When connecting the speakers, insert the ends of the speaker cables so that they do not touch neighbouring terminals or other parts. Adjusting the Angle of the Speaker About speaker angle adjustment Screwx 4 Remove the screws on the bottom face of the base. Take off the base cover. Loosen the angle adjusting screw with the hexagonal wrench provided as an accessory. ADVICE To adjust the angle, lay the speaker on its side and move the base. Slide the speaker a little in the direction indicated by the arrow in the figure to loosen the grip of the catch on the base. Adjust the speaker angle to the required position then slide the speaker back to the left, check that the catch has engaged properly, and tighten the angle adjusting screw. ADVICE To adjust the angle, lay the speaker on its side and move the base. Angle adjustment diagram Fitting the Protective Mesh 1 Installation of protective cover. As shown in the diagram, install the protective cover. ADVICE The protective cover may be attached when the speaker is not in use or at the user s discretion. Care / Specifications Maintenance Before maintaining the unit, ensure that the power is off and the power cord removed. Remove any dirt from the unit by lightly wiping with a soft cloth. ·oe If it is particularly dirty, use a slightly damp cloth to wipe it down, then use a dry cloth. [. . . ] This is the period stipulated by the Ministry of International Trade and Industry. `Serviceable parts' are defined as those parts which are necessary to ensure the functionality of the product. Repairs and Enquiries See "Customer Enquiries" Section on the included sheet. After many years of use, check your audio equipment; Are any of these conditions present? [. . . ]