User manual EDGE 3 PORT USB HUB PLUS 9-IN-1 READER QUICK START

[. . . ] The 9-in-1 Reader should now show up in "My Computer" as 4 additional removable drives, one for each port on the reader. The digital media card may now be used as a portable storage device, accessible through standard file access methods. Note: Prior to removing the digital media card from the reader, the card must be disconnected. Failure to do so may cause data corruption and render the card unusable. [. . . ] The Operating System should then automatically install all needed drivers without further prompting. The USB 3 Port Hub Plus 9-in-1 Reader should now show up in "My Computer" as four additional removable drives, one for each port on the reader. When inserted into the reader, any digital media card(s) may now be used as portable storage devices, accessible through standard file access methods. Note: Prior to removing the digital media card from the reader, the card must be disconnected. Failure to do so may cause data corruption and render the card unusable. To disconnect the card, proceed with either of the following steps: A. Double-click the "My Computer" icon on the desktop. Right-click on the appropriate removable disk icon and select the "Eject" option. Wait for the disconnect confirmation prior to removing the card. Left-click on the PC card with the green arrow in the system tray. On the pop-up menu, highlight the appropriate card to remove, and then select "Stop USB Mass Storage Device. " Wait for the disconnect confirmation prior to removing the card. Installation on Macintosh Systems. (No driver is required for OS 10. 1. 2 or greater) Macintosh Systems Note: Do not connect the reader before turning the machine on!It is strongly recommended to use Mac OS 9 or greater when operating the EDGE USB 2. 0 3-Port Hub Plus 9-in-1 Reader. Computers running Mac OS versions between 8. 6 and 9. 0 must first update their OS with Apple's USB Adapter Card Support for Mass Storage devices before using USB devices. Download the driver from our website at www. edgememory. com/ support/downloads. Choose product and download the Apple OS 9. x file. Double-click the "Installer" file (USBCardReader) and follow the onscreen instructions. When the installation is complete, restart the computer. Once the system reboots, connect the USB 2. 0 3-Port Hub Plus 9in-1 Reader to the computer with the supplied cable and insert digital media card(s). For each card inserted, the computer will show a new drive icon on the desktop. [. . . ] Make a directory in /mnt (ex: mkdir /mnt/usb). Execute a mount /dev/sda* /mnt/usb (if mount point was . dev/sda). Supported Card Formats: CompactFlash® Type I and II SD Memory CardTM Memory StickTM Memory Stick DUOTM IBM MicrodriveTM M u l t i M e d ia ( M M C ) C a r d TM Memory Stick PROTM SmartMediaTM Hardware Installation (No Driver Required for 3-port Hub) 1. Plug in the AC power adapter to power jack (No external power required under 100mA). [. . . ]