User manual EDGE MULTI-SLOT CARD READERS INSTALLATION GUIDE

[. . . ] The Operating System should automatically install all needed drivers without your aid. The 6-in-1 Reader should now show up in "My Computer" as four additional removable drives, one for each port on the reader. When inserted into the reader, any digital media card(s) may now be used as a portable storage device, accessible through standard file access methods. The digital media card may now be used as a portable storage device, accessible through standard file access methods. [. . . ] Once opened, double click on the "Setup" icon. It will install the software automatically, then ask you to reboot your computer. Once your machine has rebooted, connect the Reader's USB plug to the USB port on your PC or USB Hub. The 6-in-1 Reader should now show up in "My Computer" as 4 additional removable drives, one for each port on the reader. The digital media card may now be used as a portable storage device, accessible through standard file access methods. Prior to removing the digital media card from the reader, the card must be disconnected. Failure to do so may cause data corruption and render the card unusable. To disconnect the card, proceed with either of the following steps: A. Double-click the "My Computer" icon on the desktop. Right-click on the appropriate removable disk icon and select the "Eject" option. Wait for the disconnect confirmation prior to removing the card. Left-click on the PC card with a green arrow in the system tray. On the pop-up menu, highlight the appropriate card you want to remove, then select "Stop USB Mass Storage Device. " Wait for the disconnect confirmation prior to removing the card. 6-in-1 Usage Diagram Installation on Macintosh Systems We strongly recommend using Mac OS 9 or greater when operating the EDGETM USB Reader. Computers running Mac OS versions between 8. 6 and 9. 0 must first update their OS with Apple's USB Adapter Card Support for Mass Storage devices before using USB devices. Please do not connect the reader before you turn your machine on!Before connection of the USB Reader, turn on the Macintosh and boot as normal. Insert the driver CD into the CDROM Drive. Double Click the CD ROM icon and find "UsbCardReader" and launch it. [. . . ] Prior to removing the digital media card(s) from the reader, click and drag the new disk icon(s) to the trash folder on your desktop to disconnect your card(s). Failure to do so may result in data corruption and render the card(s) unusable. Installation on a Windows ME or XP Systems EDGE Digital Media USB 6in1 Readers use `Mass Storage Compliant' technology. This means that users running Windows ME, 2000 or XP are not required to install any device drivers to operate the reader. IMPORTANT PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING THIS PRODUCT IF YOU ARE NOT FAMILIAR WITH DOING SO. [. . . ]