User manual EDIFIER IF330 PLUS

[. . . ] Navigating the Software Menus 21 Tips and Troubleshooting 27 Learn More, Service, and Warranty Information 28 Safety Tips and Cleaning Instructions 30 1 This chapter helps you get started quickly playing music, listening to the FM radio, and voice recording with your SanDisk Digital Audio Player. Quick Start Congratulations on your purchase of a SanDisk Digital Audio Player!This chapter will help you to become familiar with your new purchase as quickly as possible. Features Your Digital Audio Player is a full-featured music and recording device that can be carried with you anywhere. Plays MP3, WMA and WMA with Digital Rights Management (DRM) support. Use the built-in microphone to capture notes and meetings. [. . . ] Press the A-B Change Mode button again to display the Repeat Setting screen. Press the Up or Down buttons to change the repetition mode. Press the Left or Right buttons to change the repetition region. Press the Record button to change the shuffle mode from on to off. Press the Select button to save your repeat mode settings. Playing Music 13 3 This chapter helps you get started listening to the FM radio with your SanDisk Digital Audio Player. Listening to the FM Radio Your player has an FM radio that can play stations in most parts of the world. This chapter helps you to become familiar with its FM Radio features. Using the FM Radio Controls Your player has three modes of operation: FM Radio for radio, Audio Play for music, and Voice Record to record notes and meetings. To play your FM radio, you need to be in FM Radio mode. Press the Play/Stop button for two seconds. The SanDisk Welcome message will appear onscreen for a moment then disappear. See The Basic Controls section on page 4 to find the Play/Stop button. WARNING: If the onscreen message says "Key Hold" and then shuts off, you need to locate the Hold button on the side of your player. Press the Select button to switch between Normal and Preset modes. If the word Empty appears onscreen, no radio station frequencies have been saved as presets. See Save a Radio Station on Page 16 to save a radio station as a preset station. Setting Preset Stations Automatically In addition to manually selecting radio station frequencies as preset stations, your player can automatically save all radio stations that have strong frequencies. See Using the FM Radio Controls on Page 14 if you need help with this step. Press the Select button to select Normal mode. If present, the rectangular box with Preset text will disappear from the screen. Press the A-B Change Mode button for two seconds. The text Auto Scanning will appear on the player screen. When the Auto Scanning text disappears, press the Select button to select the Preset mode. The rectangular box with Preset text will appear onscreen. Press the Right and Left buttons to scan from preset station to preset station. Setting Stereo and Mono Modes FM radio stations can be listened to in either stereo or mono modes. [. . . ] The warranty duration on replaced product will be that time period remaining on the original product. THIS CONSTITUTES EDIFIER'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY. SanDisk does not warrant, and shall not be responsible for, any lost data or information contained in any product (including in any returned product), regardless of the cause of the loss. SanDisk's products are not warranted to operate without failure. [. . . ]