User manual EDOBE XDOM VL88 PRODUCTSHEET

[. . . ] To ensure correct set up please read the manual and security notes carefully. VIKTIGT: Produkt skall användas till till det den är till för och inget annat. The wireless Micro Transmitter allows you to add a switch for extra incandescent, halogen, low-voltage, energy saving and LED light fixtures. Wireless and inconspicuous, the Micro Transmitter conceals itself behind a switch of your choosing. [. . . ] It integrates with existing switches eliminating the need of pulling wires or cutting extra holes in the wall. It's compatible with all ebode radio home automation devices. Cut out a 65 mm hole 40 mm deep with a hole saw. Pressing the (1) lights the green panel light. Place the Micro Transmitter and the switch in the insert box taking care to pull out the antenna as much as you can. In order to add the Micro Transmitter to a different installation from the original one, or to one with interference from a nearby system, it is necessary to program a different code. The programming address is made up of a "HOUSE" code (from A through P) and a "UNIT" code (from 1 through 16). The factory default address of the transmitter/ receiver pair is set at A1; proceed as follows to set a different code. Then the LED lights up RED once (for the HOUSE CODE), then GREEN once (for the UNIT code). For causeddetailed information about recycling environment and waste handling of this otherwise be more by inappropriate waste handling of this product. For please contact your local city office, of this product, please contact your local city of this product, more detailed information about recycling your household waste disposal service or Batteries office, your household Do not dispose of used batteries in the household rubbish!They should be deposited at a the shop where you waste disposal service purchased the product. Batteries: Do not batteries in of used batteries They should be deposited at a collection point for used batteries. Do not dispose of used dispose the household rubbish!They should be deposited at a collection point for used batteries. On-Wall Modules Product EM Description 2-position RF wall switch, ideal for retro fit installations to e. Single position RF wall switch, ideal for retro fit installations to e. Control applications or an inside or outside light. [. . . ] Single position RF wall switch, ideal for retro fit installations to e. Control applications or an inside or outside light. Cinema screen via the front panel keys, or remotely via any ebode / X10 compatible controller. Pump via the front panel keys, or remotely via any ebode / X10 compatible controller. [. . . ]