User manual EIKI LC-XM1

[. . . ] MULTIMEDIA PROJECTOR MODEL LC-XM1 OWNER'S MANUAL TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUSTMENT function cannot be operated when "RGB, " "HDTV1035i" or "HDTV1080i" is selected on the SYSTEM MENU (P22 and 23). 1 2 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT RIGHT/LEFT buttons to select PC ADJUST and press the SELECT button. Another dialog box "Where to reserve" Menu will appear. In this dialog box, you can store the parameter into the area from "Mode 1" to "Mode 5. " When memorizing the new computer parameter, select the Mode with the message "Free" by pressing the POINT UP/DOWN buttons and the SELECT button. To change the parameters of the Mode previously set, select the Mode with "Stored. " When the Mode is selected, Parameter adjustment dialog box appears. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN buttons, and adjust each item to match with your computer. To change the value, press either the POINT RIGHT / LEFT button. Refer to the next page for adjusting each item. Move the arrow to "Stored" and press the SELECT button. The parameter is memorized in the selected Mode. To activate the Mode manually adjusted in this PC ADJUSTMENT Menu, select the Mode at the SYSTEM SELECT Menu. (Refer to page 22. ) This Mode has parameters being stored. The Vacant Mode. 3 Manual set Computer Mode (1 to 5). Closes the PC ADJUSTMENT Menu. 4 5 Press the SELECT button to set Full screen function on/off. Press the POINT RIGHT/LEFT button(s) to adjust the value. 24 COMPUTER MODE Total lines The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total dots The number of the total dots in one horizontal period. Adjust the number to match the image of your personal computer. Horizontal / Vertical Adjustment of the horizontal or vertical picture position. When the image is not centered on the screen, adjust each of those items. When the image has a dark bar(s), try this adjustment. Display area Adjustment of the area displayed with this projector. Select the resolution at the Display area dialog box, or adjust the number at the column of "H" or "V" to match the resolution of the image. [. . . ] q Check audio cable connection from audio input source. q Press MUTE button. No sound. 37 APPENDIX Problem: Remote Control Unit does not work. Try these Solution q Check the batteries. q Check the ALL-OFF switch on the Remote Control Unit is set to "ON. ". q Make sure nothing is between the Remote Receiver and the Remote Control Unit. [. . . ]