User manual EIKI LC-XNB3

[. . . ] MULTIMEDIA PROJECTOR MODEL LC-XNB3 LC-XNB3W OWNER'S MANUAL TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. [. . . ] Press POINT LEFT/RIGHT button to move a red frame pointer to PC ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to AUTO PC Adj. icon and then press SELECT button twice. This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Remote Control Unit. PC ADJUST MENU PC ADJUST Menu icon Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P22). Refer to step 3 of MANUAL PC ADJUSTMENT section (P26). Move a red frame pointer to AUTO PC Adj. icon and press SELECT button. NOTE q Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26. ) q Auto PC Adjustment function cannot be operated when "RGB, " "720p (HDTV), " "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P22). 24 COMPUTER INPUT MANUAL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by MultiScan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be operated when the input signal is from COMPUTER IN DIGITAL terminal or "RGB" is selected on PC SYSTEM MENU (P22). 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to PC ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. Press POINT LEFT/RIGHT button to adjust value. Fine sync PC ADJUST MENU PC ADJUST Menu icon Move a red frame icon to the item and press SELECT button. Adjusts an image as necessary to eliminate flicker from the display. Press POINT LEFT/RIGHT button to adjust value. (From 0 to 31. ) Total dots The number of total dots in one horizontal period. [. . . ] 50 ~ 100 Hz Adjustable from 31" to 300" 800 TV lines F 1. 7 ~ 2. 0 lens with f 37. 4 mm ~ 48. 3 mm with motor zoom and focus 5. 3' ~ 40. 0' (1. 6 m ~ 12. 2 m) 200 W RCA Type x 3 (Video/Y, Pb/Cb, Pr/Cr) and Mini DIN 4 pin x 1 (S-Video) RCA Type x 2 (VGA) HDB 15 Terminal x 1 and DVI 24 pin x 1 Mini Jack (stereo) x 1 Mini DIN 8 pin x 1 USB Series B receptacle x 1 RCA Type x 2 1. 0 W RMS 1 speaker, 1. 18" x 1. 57" (30mm x 40mm) 0° to 15. 6° AC 100 ~ 120 V (3. 6 A Max. Ampere), 50 / 60 Hz (The U. S. A and Canada) AC 200 ~ 240 V (1. 8 A Max. Ampere), 50 / 60 Hz (Continental Europe) 41 °F ~ 95 °F (5 °C ~ 35 °C) 14 °F ~ 140 °F (-10 °C ~ 60 °C) Power Source Operating Range Dimensions Net Weight Laser Pointer : : : : : AA, UM3 or R06 Type x 2 16. 4' (5m) / ±30° 2. 2" x 1. 3" x 7. 6" (55mm x 34mm x 192mm) 0. 36 lbs (165 g) (including batteries) Class II Laser (Max. Output : 1mW / Wave length : 650±20nm) Accessories Owner's Manual AC Power Cord Wireless Remote Control Transmitter and Batteries VGA Cable Control Cable for PS/2 port Carrying Bag Lens Cover q The specifications are subject to change without notice. OPTIONAL PARTS The parts listed below are optionally supplied. [. . . ]