User manual EINHELL BT-AC 210-24

[. . . ] When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well. [. . . ] The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. do not set up the compressor in damp or wet rooms. The compressor may only be used in suitable rooms (with good ventilation and an ambient temperature from +5°C to +40°C). there must be no dust , acids , vapors , explosive gases or inflammable gases in the room. The compressor is designed to be used in dry rooms. It is prohibited to use the compressor in areas where work is conducted with sprayed water. The oil level in the compressor pump has to be checked before putting the equipment into operation. You must fully assemble the appliance before using it for the first time. Power supply: Motor rating in kW/HP: Operating mode Compressor speed in rpm: Operating pressure in bar: Pressure vessel volume in litre: Theoretical intake rate in l/min. : Sound power level LWA in dB: Sound pressure level LpA in dB: Protection type: Machine weight in kg: 230 ~ 50 Hz 1. Fitting the air filter (1) Remove the transportation stop with a screwdriver or similar and screw the air filter (1) securely to the equipment. Replacing the oil sealing plug (14) Remove the transportation cover from the oil filler opening with a screwdriver and insert the supplied oil dipstick (14) into the oil filler opening. 5 Voltage The compressor is equipped with a mains cable with shock-proof plug. This can be connected to any 230V ~ 50Hz shock-proof socket which is protected by a 16 A fuse. Before you use the machine, make sure that the mains voltage complies with the specifications on the rating plate. In the case of low temperatures below +5°C, motor start-up is jeopardized as a result of stiffness. Operating mode S3 - 25% - 10min: S3 = Intermittent mode without influencing the starting process. This means that during a period of 10 min the max. Report any damage immediately to the company which delivered the compressor. The compressor should be set up near the working consumer. Avoid long air lines and long supply lines (extensions). Make sure the intake air is dry and dust-free. [. . . ] Of course, if you would prefer to call us then we are also happy to offer our assistance under the service number printed below. Please note the following terms under which guarantee claims can be made: 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. We do not charge you for this guarantee. [. . . ]