User manual EINHELL BT-EN 20

[. . . ] The use of staples and nails other than those listed in the directions for use may result in risk of injury. Be sure to pull out the power plug whenever the tool is not being used, each time before carrying out any maintenance, and whenever you want to change the staples or nails!It is important to wear suitable protective clothing, and particularly safety goggles, when working with the electric stapler/nailer. Power supply Shots per minute Staple width Staple length Staple thickness Nail length Nail thickness Weight Totally insulated Sound pressure level LpA Sound power level LWA Vibration ahv 230 V ~ 50 Hz 20 11. [. . . ] 1) The filling level indicator (6) shows you if there are still enough staples or nails in the magazine (5). Always pull out the mains power plug before starting any cleaning work. Cleaning Keep all safety devices, air vents and the housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. We recommend that you clean the tool immediately after you use it. Clean the tool regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the tool's plastic parts. ensure that no water can get into the interior of the tool. Maintenance There is a risk of staples becoming jammed particularly when the electric stapler is held at any angle when operated. In this case, switch the tool off immediately and pull the power plug. Always pull the plug out of the power socket before doing any work on the electric stapler!Carefully remove the jammed staples with a pair of pliers. Push the magazine slide (4) back in until it stops and snaps noticeably into place. There are no parts inside the equipment which require additional maintenance. Ordering replacement parts Please quote the following data when ordering replacement parts: Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www. The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. K t p erklärt folgende Konformität gemäß EU-Richtlinie und Normen für Artikel declares conformity with the EU Directive and standards marked below for the article déclare la conformité suivante selon la directive CE et les normes concernant larticle verklaart de volgende conformiteit in overeenstemming met de EU-richtlijn en normen voor het artikel declara la siguiente conformidad a tenor de la directiva y normas de la UE para el artículo declara a seguinte conformidade de acordo com a directiva CE e normas para o artigo förklarar följande överensstämmelse enl. The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH. T For EU countries only Never place any electric tools in your household refuse. [. . . ] In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies when an on-site service is used. In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. [. . . ]