User manual EINHELL EURO 24

[. . . ] There is a risk of them catching on moving parts. Rubber gloves and non-slip shoes are recommended when working outdoors. Put on a hair net if you have long hair. Wear goggles - Wear a breathing mask when working in dusty conditions. [. . . ] G The compressor is designed to be used in dry rooms. It is prohibited to use the compressor in areas where work is conducted with sprayed water. Safety instructions for working with compressed air and paint sprayers Compressors and lines reach high temperatures during operation. Gases or vapours drawn in by the compressor have to be kept free of constituents that may cause fire or explosions inside the compressor. When you disconnect the hose coupling, hold the coupling element in your hand to prevent injury from the whiplashing hose. Wear goggles when working with the blow-out gun. Injuries may easily result from foreign bodies and blasted parts. Never point the blow-out gun at other persons and never use it to clean clothes that are still being worn. Note the safety instructions for paint spraying!G Never process paints or solvents with a flash point below 21°C. G It is imperative to use filtering equipment (face masks) when processing harmful liquids. Note also the information concerning safety precautions published by the manufacturers of these liquids. G Smoking is prohibited during the spraying operation and in the work room. G Make sure there are no open fires or open lights in the work room. G Do not keep or consume food and drink in the work room. G The details and designations of the Ordinance on Hazardous Substances, which are displayed on the outer packaging of the processed material, must be observed. Necessary, particularly the wearing of suitable clothing and masks. G The work room has to be bigger than 30 m3 and have sufficient ventilation for spraying and drying. It is always imperative to observe the regulations of your local police authorities when spraying combustible or hazardous substances. G Never process media such as white petroleum spirit, butyl alcohol and methylene chloride with the PVC pressure hose (reduced life span). Putting the compressor into operation Operation of pressure vessels in accordance with the pertinent pressure vessel regulations 1. An operator of a pressure vessel is required to keep the pressure vessel in good working order, to operate it properly, to supervise its use, to carry out essential maintenance and repair work immediately, and to introduce essential safety measures according to requirements. [. . . ] Som leder till överbelastning av motorn och därmed till att överbelastningsskyddet slår till: G för hög nätspänning G för höga omgivningstemperaturer och otillräcklig lufttillförsel G defekta kompressorventiler eller otät backventil G min. The undersigned declares in the name of the company that the product is in compliance with the following guidelines and standards. The product described in these instructions comes with a 2 year warranty covering defects. This 2-year warranty period begins with the passing of risk or when the customer receives the product. [. . . ]