User manual EINHELL FREELEXO+

[. . . ] - Read the operating instructions to reduce the risk of injury. Children are not allowed to use this equipment. This equipment can be used by people with limited physical, sensory or mental capacities or those with no experience and knowledge if they are supervised or have received instruction in how to use the equipment safely and understand the dangers which result from such use. Children are not allowed to play with the equipment. [. . . ] First, enter the current PIN (standard PIN: 1-2-3-4) using the numeric keypad (57). Then use the numeric keypad (57) to enter your personal PIN. After this, confirm the settings you have made by pressing the "OK" button (54). " with the "OK" button (54) or press the Back button (55) to discard the change. Requesting your PIN if you lose it Have the receipt and the serial number of the robot lawn mower ready. Connect a USB stick to the USB connection Press the POWER button (51) and the "OK" button (54) at the same time. The robot lawn mower will now start in boot mode. Press the 1 key on the numeric keypad (57). Import the data from the USB stick to a computer. Txt) will have been created by the robot lawn mower. this file contains a PUK , a personal code. Please contact the customer services team to obtain your PIN. Settings of the robot lawn mower The main menu of the LCD display (50) shows you the current date and time setting of the robot lawn mower, as well as the current charge status. You can choose between the tab options of "General settings", "Mowing time settings" and "Change PIN". Using the navigation buttons (56), move the display to the tab you require and confirm the entry with the "OK" button (54). Using the navigation buttons (56), go to the point that you wish to change and enter the figure you require using the numeric keypad (57). After this, confirm the settings you have made by pressing the "OK" button (54). confirm the message "Save changes?" with the "OK" button (54) or press the back button (55) to discard the change. The rain sensor (5) can be switched on and off with this setting. The default factory setting for the sensor is "On". Using the navigation buttons (56), go to the setting that you require. [. . . ] - Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by dropping it). - Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. The guarantee is valid for a period of 24 months starting from the purchase date of the device. Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. [. . . ]