User manual EINHELL RG-EL 2500 E

[. . . ] Vor Inbetriebnahme Bedienungsanleitung und Sicherheitshinweise lesen und beachten Read and follow the operating instructions and safety information before using for the first time. When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. [. . . ] Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. The tool can be plugged into any socket-outlet (with 230 V AC) that is equipped with a 10A fuse or higher. Read all safety regulations and instructions. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. Read the directions for use before operating the tool. Keep all other persons away from the danger zone. Switch off the tool and pull out the power plug before carrying out any cleaning or maintenance work. Keep your hands and feet away from all openings. AC motor Output no load speed n0 Protection class Air velocity Suction rate Volume of debris bag Sound volume level LWAd Sound pressure level LpAd Vibration ahv Weight 230V ~ / 50 Hz 2500 watts 6000-13000 min-1 II / ® 270 km/h 780 m3/h approx. Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data. Always pull the power plug before making adjustments to the equipment. 2, 3a, 3b, 3c) First plug together the front suction tube (1) and the rear suction tube (2). When the two parts engage correctly they make an audible click. Then affix the two tubes using the special screws size 4. With the locking screw (3) in horizontal position, plug the vacuum tube into the motor housing (Fig. Then use the supplied open-ended wrench to turn the locking screw 90° to the right (Fig. Note: Please note that the two vacuum tubes must always be joined together before they are mounted on the motor housing, and that they must never be taken apart when mounted!Note: The garden blower vac is equipped with a safety lock-off switch which only works when the suction tube is mounted on the motor housing. It engages correctly when it makes an audible click. start up the tool only after the mounting has been fully completed. [. . . ] 2 Maintenance Should the tool experience problems beyond those mentioned above, let only an authorized professional or a customer service shop perform an inspection. There are no parts inside the equipment which require additional maintenance. 3 Ordering replacement parts: Please quote the following data when ordering replacement parts: Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www. The unit is supplied in packaging to prevent its being damaged in transit. [. . . ]