User manual EINHELL RGH 2040

[. . . ] Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes. Collecting the shredded material The shredded material bag supplied with the machine can be placed under the chute opening. The chassis and the wheels must be fitted before use. [. . . ] This will help to prevent the loading funnel becoming clogged with material. Kitchen waste) ­ put it straight in the compost box. Entangled branches and leaves should be thoroughly shredded before loading any more material. Do not allow the ejector outlet of the funnel to become clogged with shredded material ­ since this may result in material pile-ups. If you have to replace any blade, you must only use genuine blades to ensure that they meet the relevant quality and safety criteria. Please note: For safety reasons we recommend that you have all sharpening and blade replacement work carried out by a specialist workshop. Always wear heavy duty working gloves Remove the blade screws (Fig. The blades can now be turned or replaced with new blades. Before carrying our any inspection or servicing work on the machine, disconnect it from the power supply by disconnecting the machine connection cable (extension) from the machine plug. If repairs are necessary, please contact our customer service center. This will help to keep the machine in good working order and is the basis for a long working life. When you have finished your work, pull the loading funnel forwards and clean the inside. Use a brush to remove deposits from metal parts on the inside. apply a thin coating of oil to the cleaned blade plate and blades. When you close the loading funnel, make sure that the safety switch and the release screw are clean. Keep the vent slots clean while you work. Clean the plastic body and other plastic parts with a mild household cleaning agent and a damp cloth. Do not use any aggressive agents or solvents for cleaning purposes. Never spray down the shredder with water. Please provide the following information on all orders for spare parts: Model/type of tool Article number of the tool ID number of the tool Number of the required spare part For our latest prices and information please go to www. The shredder and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. [. . . ] In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies when an on-site service is used. In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. [. . . ]