User manual EIZO DURAVISION FDV1001T

[. . . ] Important Please read this User's Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. For U. S. A. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: DuraVision FDX1001T/FDV1001T/FDX1201T is in conformity with Part 15 of the FCC Rules. [. . . ] Used to select the setting or adjustment items, or to increase or decrease the adjustment values on each menu. or switches When the settings menu is not displayed, pressing between displaying and not displaying the crosshair. Indicates monitor's operation status. Blue : Operating 3 4 button button 5 Power indicator 6 Maintenance port Serial port for the touch 7 panel 8 Power jack (DC-IN) 9 Input signal connector 10 Input signal connector 11 Input signal connector 12 Cable holder 13 Cable tie Orange : Power off For monitor control Connects the PC to the monitor with an RS-232C cable. D-Sub mini 15-pin connector × 1 S-Video input connector × 1 Video input connector × 1 Covers the monitor cables. Clinches the cables. 10 Chapter 1 Introduction Chapter 2 1 Connecting Cables 2-1. Connection Procedures Connects to external equipment compatible with the monitor. When used as a PC monitor page 11 When using video equipment page 12 When used as a PC monitor · When replacing the current monitor with an FDX1001T / FDV1001T /FDX1201T monitor, be sure to change the PC settings for resolution and vertical frequency to those which are available for the FDX1001T / FDV1001T/ FDX1201T monitor referring to the resolution table (see below) before connecting the PC. ATTENTION Compatible Resolutions/Frequencies The monitor supports the following resolutions. FDX1001T/FDX1201T 640 × 400 640 × 400 640 × 480 640 × 480 720 × 400 800 × 600 832 × 624 1024 × 768*1 *1 Resolution NEC PC-9801 NEC PC-9821 AP2 Apple Macintosh VGA, VESA VGA TEXT VESA Apple Macintosh VESA Display Mode Frequency 56 Hz 70 Hz 67 Hz ~75 Hz 70 Hz ~75 Hz 75 Hz 60 Hz Dot Clock ~65 MHz Recommended resolution (Set this resolution. ) FDV1001T Resolution 640 × 480 640 × 480 Apple Macintosh VGA Display Mode Frequency 67 Hz 60 Hz Dot Clock ~31 MHz Chapter 2 Connecting Cables 11 (1) Connect the monitor to the PC with a signal cable that matches the connectors. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling. PC monitor D-Sub mini 15-pin connector Signal cable MD-C87 (optional) D-Sub mini 15-pin connector or DVI connector Signal cable FD-C16 (optional) When using video equipment (1) Connect the monitor to the video equipment with a signal cable that matches the connectors. monitor Video equipment S-Video S-Video cable (Commercially available product) S-Video or Video Video cable (Commercially available product) Video 1 Chapter 2 Connecting Cables 2 Plug the power cord of the monitor into a power outlet. (1) Connect the power cord to the AC adapter. (2) Connect the AC adapter to the Power jack of the monitor, and after that, connect the power plug to a power outlet. ATTENTION · This product does not include a power cord. Please provide separately a power cord which meets the usage requirements. · For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord completely shuts off power supply to the monitor. 2-2. Adjusting the Screen Angle Hold left and right edge of the monitor with both hands, and adjust the tilt and swivel to the best condition for working. Chapter 2 Connecting Cables 1 2-3. Installing the Touch Panel Driver · The user account to be used for installing the touch panel driver must have the "Administrators" privilege. · When reinstalling the touch panel driver to update the driver, etc. , restart the PC after uninstalling the driver and then install it. ATTENTION 1 2 3 Uninstall the other touch panel driver, if it is installed. Insert the "EIZO Touch Panel Disk" CD-ROM to the CD-ROM drive. Double click "Setup. exe" from the drive into which the "EIZO Touch Panel Disk" CD-ROM has been inserted. Follow the instruction of the menu to install the touch panel driver. * Select the below driver from the [Supported Controllers] window. - [DMC, TSC-10 Series, Serial] 4 Connect the monitor to the PC with the included RS-232C signal cable. Connectors on the PC COM port RS-232C Cable (supplied) Connectors on the monitor Serial port for the touch panel 5 Restart the PC. 2-4. Calibrating the Monitor Calibrate the monitor according to the instruction manual for the touch panel driver on the CD-ROM. 1 Chapter 2 Connecting Cables Chapter 3 Settings and Adjustments 3-1. Basic Operation and Functions Basic operation of Setting menu 1 2 Displaying Setting Menu Press . Setting/Adjusting 3 Exiting Choose [Exit] with NOTE or , and press . · Keeping pressed for 2 seconds will also exit the Setting menu. Chapter 3 Settings and Adjustments 1 Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal. : Configurable : Not configurable Tab Color Setting / adjustable item Brightness Contrast Black Level Sharpness Saturation Hue PC Settings Clock Phase Position Range Adjustment Color Mode Red/Green/Blue Reset Reset Others Video Aspect Power Save Reverse Crosshair Color Width Beep Language Touch Panel Information PC Video page 18 Reference page 17 1 Chapter 3 Settings and Adjustments 3-2. Color Adjustment This will perform color adjustments. Please switch between the input screens you want to adjust and adjust them one by one. Adjustable item / adjustable value Brightness Contrast Black Level Sharpness Saturation Hue PC Settings*1 0 - 30 0 - 30 0 - 30 Off/Low/High -30 - +30 -30 - +30 Clock Phase Position Range Adjustment Color Mode*2 Red/Green/ Blue Reset Reset *1 Adjusting Adjusts the brightness of the backlight. [. . . ] It is recommended that range adjustment be made before color adjustment. Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor consists of 1024 (FDX1001T/FDX1201T) / 640 (FDV1001T) horizontal pixels and 768 (FDX1001T/FDX1201T) / 480 (FDV1001T) vertical pixels. At a resolution of 1024 × 768 (FDX1001T/FDX1201T) / 640 × 480 (FDV1001T), all pixels are illuminated as a full screen (1:1). Chapter 5 Reference 5-4. Preset Timing The following table shows the factory preset video timing of the PC. · Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. [. . . ]