User manual EIZO ECLIENT 620L

[. . . ] User's Manual Color LCD Monitor integrated Windows-based Terminal Please ask your system administrator for details such as settings of the unit. English SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2002-2004 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. [. . . ] Key combinations for an adjustment is presented on the stickers. · We recommend that you retain the original packing materials in case of future need. 10 1. OPERATION This chapter shows how to start and end 620L operation. (3) Microsoft Windows NT Server 4. 0 Terminal Server Edition: Select [Logoff]. Microsoft Windows 2000 Server / Advanced Server / Datacenter Server: Select [Shut Down. . . ] and select [Logoff] of the [Shut Down Windows] dialog box. The session ends and automatically logs off from the WTS. The "Terminal Connection Manager" dialog box is displayed. If a dial-up connection is running, click the active button on the right bottom of the screen. Clicking the button Disconnects the dial-up connection. 2. Shut down the 620L. There are 3 ways to shut down the unit. · Click [Shut down] at "Terminal Connection Manager" dialog box (or press the power button). "eClient Shut down" dialog box is displayed. "eClient Shut down" dialog box is displayed. The unit automatically shuts down in 20 seconds. 14 2. OPERATION English If your 620L starts its operation with an application 1. Log off from the WTS. Close applications to log off from the WTS. "Terminal Connection Manager" dialog box is displayed. If a dial-up connection is running, click the active button on the right bottom of the screen. Clicking the button Disconnects the dial-up connection. 2. Shut down the 620L by following the step 2 of "If your 620L starts its operation with a desktop". NOTE · It is possible to Disconnect from a WTS without closing applications in use (or without logging off). (The last view of the application is displayed when the next connection to the WTS is made. ) 2. Opening/Closing a Local Web Browser Opening a Local Web Browser 1. "Terminal Connection Manager" dialog box is displayed. Please follow the instruction depending on the network environment of the 620L. (Ask your system administrator for your connection environment. ) (1) If the web server is on the same network (Intranet): Go to step 3. (2) If the web server is not on the same network, and dial-up connection is needed (Internet): Click an active button on the right bottom of the screen. A dial-up connection is made by clicking the button. Check the clock's running, and go to step 3. 3. Click the [Connections] tab. Select the [Web connection] and click [Connect] (or simply double click the [Web connection]). 4. The local web browser opens. It is possible to browse web page on the internet. 16 2. OPERATION English Closing a Local Web Browser 1. Close the local web browser. Select [Close] on the [File] and close the local web browser. [. . . ] (rated 100-120 Vac) Only WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, users, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ]