User manual EIZO FORIS FS2331

[. . . ] Important Please read PRECAUTIONS, this User's Manual, and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. ·Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC or external device to using the monitor. ·The latest User's Manual is available for download from our web site: http://www. eizo. com Location of Caution Statement <For USA-California Only> CR Coin Lithium Battery contains Perchlorate Material - special handling may apply. See www. dtsc. ca. gov/hazardouswaste/perchlorate. [. . . ] Select "Enable" or "Disable" with 4. Press Note or . to exit the adjustment. · HDMI input does not support DDC/CI communication. 3-5. Locking Buttons "Key Lock" This function allows you to lock the buttons on the monitor. Choose "Monitor Settings" in the Setting menu, and press 2. Choose "Key Lock" in the "Monitor Settings" menu, and press The "Key Lock" menu appears. . Press Note or . to exit the adjustment. · The following operations are available even if the buttons are locked: - Turning on or off the monitor with the Power button · Does not lock the remote control operation. Chapter3SettingMonitor 29 3-6. Setting the EIZO Logo Display "Logo" When the monitor is turned on, the EIZO logo appears on the screen. You can choose to display or not to display the EIZO logo. Choose "Monitor Settings" in the Setting menu, and press 2. Choose "Logo" in the "Monitor Settings" menu, and press The "Logo" menu appears. . Select "On" or "Off" with 4. Press or . to exit the adjustment. 3-7. Setting Language "Language" This function allows you to select a language for the Setting menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Japanese/Simplified Chinese/Traditional Chinese Procedure 1. Choose "Monitor Settings" in the Setting menu, and press 2. Choose "Language" in the "Monitor Settings" menu, and press The "Language" menu appears. . Press or . to exit the adjustment. 3-8. Changing the HDCP authentication setting for HDMI signal input The external device cannot be authenticated successfully according to your external device and the screen cannot be displayed. In this case, follow the procedures below to change the HDCP from the normal to extended state. Press on the remote control or on the monitor to turn OFF the monitor power. on the monitor for five seconds or more. The setting changes and the monitor power is turned on. Note · The current setting status can be identified based on the color used to display the input port or signal error. Setting Normal Input port HDMI1 Signal Error HDMI1 Signal Error Extended HDMI1 HDMI1 Signal Error 30 Chapter3SettingMonitor 3-9. Resetting the Monitor to the Default Settings There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full Reset for resetting all settings to the defaults. Attention · After resetting, you cannot undo the operation. Note · Regarding the default setting, see "Main Default Settings" (page 44). To reset the color adjustments "Color Reset" Procedure 1. [. . . ] (b) AllaformeravinkompatibilitethosProduktenpågrundavmöjligatekniskainnovationeroch/ellerbestämmelser. (c) Alla försämringar av bildens prestanda beroende på förbrukningsdelar så som LCD-panel och/eller bakgrundsbelysningetc. (t. ex. ändringariljusstyrka, jämnhetiljusstyrka, färg, färgjämnhet, defektapixlaroch/eller fastlysandepixlaretc. ). (d) AlladefekterhosProduktensomorsakatsavexternutrustning. (e) AlladefekterhosProduktenpåvilkendetursprungligaserienumretharändratselleravlägsnats. [. . . ]