User manual EIZO LA-030-W

[. . . ] To install the monitor with this product, it is required the expert knowledge of building techniques. Refer the installation to qualified personnel. Attach the applicable EIZO LCD monitor only. [. . . ] When moving the arm, be sure not to pinch a finger between the moving parts. The spring mechanism inside of the stand may result in injury or equipment damage when disassembling. Doing so may result in injury or equipment damage. Package Contents ________________________________ Please contact your local dealer for assistance if any of the listed items are missing or damaged. Arm Unit -Attaching-wall Part -Attaching-monitor Part -Arm Part (Enclosed to LA-030-W) Arm Cover, 2 pcs User's Manual Sheet (Compatible Screws List) Mounting Screws, 4 pcs each (For the compatible screws and monitors, refer to the `Compatible Screws List'. ) Fixing Screw(s) M4 x 16: 1 pc (LA-011-W) / 2 pcs (LA-030-W) (Fixing screw(s) is put into the different bag from the bag which the mounting screws are into. ) NOTE Screws for fixing wall anchor on the wall are not enclosed. Prepare appropriate screws in advance. Compatible Monitors and Wall ______________________ Monitors Supported Weight* Unit: mm (inch) 4. 0 kg to 8. 0 kg 100 mm x 100 mm (VESA compatible) Hole Spacing *Total weight of the monitor including the weight of the cables and optional peripherals. Wall Thickness and Depth Refer to right figure More than 130 kg Weight Capability How to attach the monitor _________________________ Use specified screws for tightening up referring to the `Compatible Screws List'. How to attach the monitor: LA-011-W 1. Attach the Attaching-wall Part of the arm on the wall. Fix them with screws (4 pcs). Wall Screws (4 pcs) 2. Attach the Attaching-monitor Part to the monitor. (1) Attach the Attaching-monitor Part to the monitor with specific screws (4 points). (2) Put in the arm covers to the shield plate with sliding them rightward or leftward. (1) (2) Arm covers Mounting screws (4 pcs) 3. Attach the monitor to the wall. (1) Connect the concave portion of the Attaching-monitor Part (below figure A) to the salient of the Attaching-wall Part (below figure B). NOTE Check the Attaching-monitor Part is connected firmly. Connect firmly (2) Fix with the enclosed fixing screw. (1) (2) Fixing screw A Concave portion of the Attaching-monitor Part B Salient of the Arm Part How to attach the monitor: LA-030-W 1. Attach the Attaching-wall Part of the arm on the wall. Fix them with screws (4 pcs). Wall Screws (4 pcs) 2. Attach the Arm Part to the Attaching-wall Part. (1) Connect the Arm Part to the Attaching-wall Part. (2) Fix with the enclosed fixing screw. (1) (2) Fixing Screw 3. Attach the Attaching-monitor Part to the monitor. (1) (2) Attach the Attaching-monitor Part to the monitor with specific screws (4 points). Put in the arm covers to the shield plate with sliding them rightward or leftward. (1) (2) Arm covers Mounting screws (4 pcs) 4. Attach the monitor to the wall. [. . . ] Warranty period for any replaced and/or repaired product under this warranty shall expire at the end of the original warranty period. EIZO AND EIZO AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR EIZO AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ]