User manual EIZO LA-131-D

[. . . ] Thank you very much for choosing the EIZO product. Please read this User's Manual carefully to familiarize yourself with safe and effective usage procedures. Please retain this manual for future reference. [Location of the Caution Statements] PRECAUTIONS To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit. WARNING Attach the applicable EIZO LCD monitor only. [. . . ] Doing so may cause the monitor to tumble or fall and result in injury or equipment damage. When moving the arm, be sure not to pinch a finger between the moving parts. When rotating the monitor for portrait display, make a space enough between a desk and a monitor not to pinch a finger. The spring mechanism inside of the stand may result in injury or equipment damage when disassembling. Package Contents ________________________________ Please contact your local dealer for assistance if any of the listed items are missing or damaged. Arm Unit (Clamping Part / Arm Part / Attaching-monitor Part)Arm Cover, 2 pcs User's Manual Sheet (Compatible Screws List) Mounting Screws, 4 pcs each (For the compatible screw and monitors, refer to the `Compatible Screws List') Fixing Screws M4 x 16, 2 pcs Fixing screws are put into the different bag from the bag which the mounting screws (8 pcs) are into. Compatible Monitors and Desks ____________________ Monitors Supported Weight* Hole Spacing 4. 0 kg to 9. 0 kg 100 mm x 100 mm (VESA compatible) 25~60mm *Weight : Total weight of the monitor including the weight of the cables and optional peripherals. Desks Thickness and Refer to right figure Depth Weight Capability 60 kg min. (recommended) Desk More than 50mm How to attach the monitor _________________________ 1. Clamp the Clamping Part to the edge of the desk. Press the fitting against the edge of the desk and clamp with turning the knob counter-clockwise. Press against the desk Clamping Part 2. Attach the Arm Part to the Clamping Part. (1) Connect the Arm Part to the Clamping Part. (2) Fix with the enclosed fixing screw. (1) (2) Knob Arm Part Fixing Screw Clamping Part 3. Attach the Attaching-monitor Part to the monitor. Use specified screws for tightening up referring to the `Compatible Screws List'. (1) (2) Attach the Attaching-monitor Part of the unit to the monitor with specific screws (4 points). Put in the arm covers to the shield plate with sliding them rightward or leftward. (1) (2) Arm Covers Mounting Screws (4 pcs) 4. Attach the monitor to the Arm Part. Connect the concave portion of the Attaching-monitor Part (below figure A) to the salient of the Arm Part (below figure B). NOTE Check the Attaching-monitor Part is connected firmly. Connect firmly (2) Fix with the enclosed fixing screw. (1) (2) Fixing Screw A Concave portion of the Attaching-monitor Part B Salient of the Arm Part Specifications____________________________________ Dimension (W) x (H) x (D) 150 (5. 9) x 220. 5 ~ 472. 2 (8. 7 ~ 18. 6) x 445. 2 ~ 645. 2 (17. 5 ~ 25. 4) mm (inch) Weight 4. 9 kg (10. 8 lbs) Dimensions Unit: mm (inch) NOTE The value within the dimensions drawing is only for reference, and range of motion differs according to the installed condition. LIMITED WARRANTY EIZO NANAO CORPORATION ("EIZO") and EIZO authorized distributors warrant, subject to and in accordance with the terms of this warranty, to the original purchaser who purchased the product from EIZO or EIZO authorized distributors that this product shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase, and that, in the event of malfunction of the product during the warranty period attributable directly to defective material and/or workmanship, EIZO and EIZO authorized distributors will, at their sole discretion, either repair or replace the defective product. EIZO and EIZO authorized distributors shall bear no other liability or obligation under this warranty. EIZO and EIZO authorized distributors cease to bear any obligation under this warranty with regard to any parts of the product upon expiration of five (5) years after the production of such parts is discontinued. [. . . ] IN NO EVENT SHALL EIZO OR EIZO AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND EIZO AUTHORIZED DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES. [. . . ]