User manual EIZO LS-HM1-D

[. . . ] [Location of the Caution Statements (Bottom)] PRECAUTIONS To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit. WARNING Attach the applicable EIZO LCD monitors only. Not doing so may cause the stand or monitor to drop, which may result in injury or equipment damage. Attaching a monitor only may cause the stand to fall and result in injury or equipment damage. [. . . ] Adjusting the height or the angle with gripping the i·Sound is dangerous. It may result in injury or equipment damage. Package Contents ________________________________ Please contact your local dealer for assistance if any of the listed items are missing or damaged. Stand Stand Mouting Cover, 4 pcs Stoppers for height adjustment (attached to the stand, detachable), 5 pcs User's Manual Sheet (Compatible Screws List) Mounting Screws, 8 pcs each (For the compatible screws and monitors, refer to the `Compatible Screws List'. ) Note before Use __________________________________ The paperboard is inserted on the stoppers of this stand for the protection of the stand in transport condition. 3. Detach the bottom one in five stoppers. Slide down other four stoppers and remove the paperboard. Reattach the detached stopper. NOTE When repacking and transporting the stand, reinsert the paperboard on the stoppers for the protection of the stand. 2 3 1 Paperboard Stopper How to attach ____________________________________ Use specified screws for tightening up referring to the `Compatible Screws List'. 1. 2. Position the monitor to fit the holes at the rear of the monitor to the shield plate of the stand. Tighten the two screws at the top as a temporary stop then tighten the rest of screws. (Tighten the two screws at the top securely after attaching all screws. ) Attach the covers to the shield plate with sliding them rightward or leftward. 1 2 Covers How to adjust ____________________________________ Height Adjustment Adjust the height with using the stoppers. (Six stage height adjustable) Attach or remove the stopper from the bottom one by one with holding the arm of stand from underneath. Horizontal Position Adjustment Grip the top and bottom sides of the monitor firmly and slide it with lifting the bottom side of the monitor to the front. Lift up Angle Adjustment Hold the monitor with both hands and adjust the monitor angle as desired. Cable Connection Connect the cables (ex. After connecting, lead the cables into the cable holder. (The cables are recommended to lead with slight sag for the smooth motion of the stand when the height, horizontal position and angle adjustments. ) Cable Entrance Specifications____________________________________ Height Adjustment Range Dimensions Weight 75 mm (3. 0") [Six stage height adjustment: bottom point, +15 (0. 6"), +30 (1. 2"), +45 (1. 8"), +60 (2. 4"), +75 (3. 0") mm] 604 (W) x 326 to 401 (H) x 212 (D) mm (23. 8" x 12. 8" to 15. 8" x 8. 4") 6. 8 kg (14. 99 lbs. ) Dimensions Unit: mm (inch) Top Front Side LIMITED WARRANTY EIZO NANAO CORPORATION ("EIZO") authorized distributors warrant to the original purchaser that the product shall be free from defect in material and workmanship for a period of one (1) year from the date of purchase. The service parts stock for the product shall be maintained for five (5) years after the production is discontinued. This warranty is valid only in the countries where EIZO's authorized distributors are located. In the event of malfunction during the warranty period attributable directly to faulty material and/or workmanship, EIZO and EIZO's authorized distributors will, at their option, either repair or replace the faulty product with the same or similar model. [. . . ] EIZO OR EIZO'S AUTHORIZED DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO, OR LOSS OF, DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY PRODUCT RETURNED TO EIZO OR EIZO'S AUTHORIZED DISTRIBUTORS FOR REPAIR. EIZO AND EIZO'S AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR EIZO'S AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCTS, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO'S AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ]