User manual ELECTRO-VOICE 610 DATASHEET

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE 610. We hope that this ELECTRO-VOICE 610 user guide will be useful to you.

Lastmanuals help download the user guide ELECTRO-VOICE 610.


ELECTRO-VOICE 610 DATASHEET: Download the complete user guide (343 Ko)

Manual abstract: user guide ELECTRO-VOICE 610DATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] Turn the dolly board 90°, and tighten the wing screw (see Figure 2). If the dolly boards are removed, replace the (2) 5/16" bolts into the rear of the enclosure. If the bolts are not replaced, the speaker will have air leaks resulting in undesirable performance. Remove Existing Screws, Install Dolly Plates, then Attach Wing Screws (2 Places) Loosen Wing Screws, Rotate and Align Grooves, then Re-attach Wing Screws Figure 1: Assembling the PX-D1 to a Phoenix PX2122 or PX2152 Loudspeaker Figure 2: Rotating the PX-D1 on the rear of a Phoenix Loudspeaker for shipping or arraying PX-D2 The Electro-Voice® PX-D2 accessory consists of a pair of dolly plates with assembled casters for use with the Phoenix PX2181 Loudspeaker. [. . . ] Align holes in the PX-D2 with the holes on the PX2181 enclosure, and tighten the (16) 5/16" bolts into the dolly boards (see Figure 3). CAUTION!If the dolly boards are removed, replace the (16) 5/16" bolts into the rear of the enclosure. If the bolts are not replaced, the speaker will have air leaks resulting in undesirable performance. Remove Existing Screws, Install Dolly Plates, then Re-attach Screws (16 Places) Fully Installed Dolly Plates Figure 3: Assembling the PX-D2 to a Phoenix PX2181 Loudspeaker 610 The Electro-Voice® 610 is an array kit that allows for suspension of up to (3) PX2122's or (2) PX2152's on a material lift. There are multiple horizontal splay and vertical tilt options that make the 610 useful in many applications. Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of rigging objects overhead. Electro-Voice® strongly recommends that all speakers be suspended taking into account all current national, federal, state and local regulations. It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such regulations. When speakers are suspended, Electro-Voice® strongly recommends that the system be inspected at least once a year. If any sign of weakness or damage is detected, remedial action should be taken immediately. Do not lift any array without ensuring pins pass through forks and are fully locked or engaged. Material Lift Adaptors Long Pin Figure 9: Assembling the Material Lift Adaptors to Material Lift Forks 5. Attach the material lift adaptors to the array bracket using the short pins (See Figure 10). There are 17 holes on the array bracket (A-Q) that can be used to approximate the desired vertical tilt angle. See the table below to determine which holes should be used to achieve the desired tilt angle. Material Lift Forks and Adaptors Short Pin Array Bracket Short Pin WARNING!Make sure the pins for each material lift adaptor pass through their respective holes in array bracket, and fully lock or engage other side of material lift adaptors. Do not lift any array without ensuring pins pass through bracket and are fully locked or engaged. Model Config Horiz° Hole # A B C D E F G H I J K L M N O P Q 1-Array N/A 610 Vertical Tilt Angles PX2122 2-Array 3-Array 30° 45° 30° 45° PX2152 1-Array 2-Array N/A 45° Figure 10: Assembling the Array Bracket to the Material Lift Adaptors +6 +4 +1. 5 -0. 5 -2. 5 -5 -7 -9 -11 -13 -15. 5 -17. 5 -19 -21 -23 -25 -26. 5 +8 +6 +4 +2 0 -2. 5 -4 -6 -8. 5 -10. 5 -12. 5 -15 -17 -19 -21 -22. 5 -24. 5 +12 +10 +8 +6 +4 +2 0 -2 -4. 5 -6. 5 -9 -11 -13 -15 -17 -19 -21 +10 +8 +6 +3 +1. 5 0 -3 -5 -7 -9 -11 -13. 5 -15. 5 -17. 5 -19. 5 -21. 5 -23. 5 +12 +10 +8 +6 +4 +2 0 -2 -4. 5 -6. 5 -8. 5 -11 -13 -15 -17 -19 -21 +7 +5 +2. 5 +0. 5 -1. 5 -3. 5 -6 -8 -10 -12 -14 -16 -18 -20 -22 -24 -25. 5 +11. 5 +9. 5 +7. 5 +5 +3 +1 -1. 5 -3. 5 -5. 5 -7. 5 -10 -11. 5 -13. 5 -15. 5 -17. 5 -19. 5 -21. 5 Note: All angles shown in chart are approximate. Cabling and any other supplementary equipment may change the absolute angle of the entire array from what is shown in the chart. Do not attempt to tilt an array beyond the angles shown in the chart. Figure 11: Vertical Tilt Angle Configurations Installation of the 610 (continued) 6. Following safe rigging practices, attach rated safety cabling (not included) from the material lift to the eyebolts (See Figure 12). [. . . ] Following safe rigging practices, attach rated safety cabling (not included) from the material lift to the eyebolts (See Figure 12). The center of gravity of the array is located below the hole on the material lift forks. Never exceed the load limits or the maximum load height that is specified by the material lift manufacturer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE 610

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE 610 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag