User manual ELECTRO-VOICE AT300 DATASHEET

[. . . ] Attach rubber bumpers to enclosure as shown in illustration. Speaker Bracket Step 2: Attach wall bracket to wall using appropriate hardware (not supplied). [. . . ] Note: It is the installers responsibility to choose and use fasteners correct for the wall construction on site. Screws Step 3: Slide enclosure (with speaker bracket attached) over wall bracket. Rubber Bumpers Wall Bracket This guide provides instruction on how to install the SL10-2V surround speaker to a wall. Correct use of appropriate hardware is required for secure installation. Only persons with the knowledge of proper hardware and safe installation techniques should attempt to install any sound systems overhead. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ]