User manual ELECTRO-VOICE DH32010A EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE DH32010A EDS. We hope that this ELECTRO-VOICE DH32010A EDS user guide will be useful to you.
Lastmanuals help download the user guide ELECTRO-VOICE DH32010A EDS.
Manual abstract: user guide ELECTRO-VOICE DH32010A EDS
Detailed instructions for use are in the User's Guide.
[. . . ] DH3/2010A
Very High Frequency Transducer
· · · · Pure titanium dome provides extended high frequency response 32mm pure aluminum voice coil Unique convex-drive phase plug 1-3/8" screw on connection
The Electro-Voice DH3/2010A is a high-performance compression driver optimized for use as the supertweeter component in professional sound reinforcement systems. [. . . ] Recommended Crossover : 2000 Hz or Higher Nominal Efficiency: 25% Sound Pressure Level2 : 113 dB, HP42 Horn (1 Watt @ 1 Meter) 112 dB, HP64 Horn 111 dB, HP94 Horn Throat Diameter : 1" (25mm) Voice Coil Diameter : 1. 25" (32 mm) Voice Coil Wire: Pure Aluminum Wire Diaphragm Construction: 0. 03 mm Pure Titanium Dome and Surround Electrical Connection: 0. 25" Fast-on Connectors Polarity: Positive Voltage to Positive Terminal Produces a Positive Acoustic Pressure Flux Density: 1. 6 Tesla Net Weight (each): 3. 4 lbs (1. 5 kg) Shipping Weight: 4. 2 lbs (1. 9 kg)
Power capacity per AES standard. Continuous pink noise, 2000 - 20, 000 Hz with a 6 dB crest factor, 2 hours. Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 1500 - 5000 Hz and calculated to 1 Meter equivalent by inverse square law.
Frequency Response (On a Tube):
Note: Frequency response and impedance of the DH3/2010A driver attatched to a 25mm (1. 0") diameter plane wave tube, using one watt input (2. 8 Vrms).
Frequency Response (On an HP64M Horn):
Note: Frequency response and impedance of the DH3/2010A driver attached to an HP64M Horn, measured on axis in the far field using one watt input (2. 8 Vrms). SPL calculated to 1 meter equivalent by inverse square law.
Dimension Drawings (Cont'):
Side View (Shown with Optional ADH-3 Adapter)
· ADH-3 Adapter (For 1. 38" Exit) 588-587 588-2855
(must be purchased separately)
· ADH-5 Adapter (For 2. 0" Exit)
(must be purchased separately)
Side View (Shown with Optional ADH-5 Adapter)
DH3 Part Number: 833-PA-990 2010A Part Number: 833-1016
U. S. A. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
www. electrovoice. com
© Telex Communications, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE DH32010A EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE DH32010A EDS will begin.