User manual ELECTRO-VOICE DM

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE DM. We hope that this ELECTRO-VOICE DM user guide will be useful to you.

Lastmanuals help download the user guide ELECTRO-VOICE DM.


ELECTRO-VOICE DM : Download the complete user guide (1752 Ko)

You may also download the following manuals related to this product:

   ELECTRO-VOICE DM DATASHEET (644 ko)

Manual abstract: user guide ELECTRO-VOICE DM

Detailed instructions for use are in the User's Guide.

[. . . ] That's why EV has taken much of the guesswork and "fear factor" out of specifying a commercial sound installation. In the past, contractors have faced the daunting task of matching different components that would deliver the best end result, from input to output. That's changed, now, through EV's "total design" approach. By offering a complete line of components that are specified and matched for optimal performance, EV customers and dealers can now easily assemble complete, end-to-end systems that deliver proven results in any commercial sound application. Now we are combining three proven brands of product to help the systems contractor solve countless system design challenges. [. . . ] Single driver is fitted to two coaxial horns, each coupled to opposite sides of the driver diaphragm. Compound diffraction design allows for more uniform dispersion throughout the frequency range. The CDP-850T features a 60-watt 1829BT driver, 280 Hz-8 kHz frequency response, uniform dispersion over the frequency range and heavy-duty drivers with 25/70. 7-volt transformer offering 8-, 15-, 30- and 60-watt taps. CFID32-T 32-watt paging projector This 32-watt paging projector is designed for high speech intelligibility under adverse ambient conditions. Low distortion and smooth frequency response make the CFID32-T a good choice for background music in indoor or outdoor applications. 55° H x 74° V at 2 kHz, 25/70. 7-volt transformer with 1. 25-, 2. 5-, 5-, 10-, 15- and 32-watt taps. CFID32-T comes in weather-resistant gray and offers diffraction effect for wide horizontal dispersion, 330 Hz-4. 2 kHz frequency response, integral swivel bracket and weather-sealed gland-nut connection. IBC8 30-watt reentrant paging projector/talkback speaker The IBC8 is a 30-watt high-powered reentrant paging projector/talkback speaker. Designed for use in adverse ambient conditions, the IBC8 is weather-resistant and appropriate for outdoor or indoor use. Features 60° dispersion at 2 kHz, integral swivel mounting bracket, gray color and 8-ohm impedance. MM2/MM2F/MM2TC 25-watt submergence proof speakers MM2 A 25-watt submergence-proof design (U. S. Navy specification) with a serrated mounting bracket allowing for a 90° arc swivel. Ideal for use near water or spray. The gray MM2 features an 82° x 82° dispersion pattern and 16-ohm impedance. Each unit is fully protected against damage from high humidity, salt water and other environmental conditions. MM2F Same as MM2 except with a flush mount designed for mounting on the front surface of bulkhead, wall or ceiling. (2. 3 kg) 30-watt driver for compound diffraction projector Compatible Horns A 30-watt heavy-duty convertible driver designed for use with compound diffraction horns. Designed for general public address applications, the 1828T includes a built-in transformer with selectable power taps at 0. 5, 1, 2, 4, 8, 15, 30 watts to accommodate 25- and 70. 7-volt lines. Weather-resistant for outdoor or indoor use, dual 1-inch screw-on exit, wide frequency response. Comes with threaded plug to convert to conventional driver. 1828C Same as 1828T except without transformer, 8-ohm impedance. FC100 Cobreflex IIB Cobreflex III 1829BT 60-watt driver for compound diffraction projector Compatible Horns A 60-watt heavy-duty convertible driver designed for use with compound diffraction horns. Designed for general public address applications, the 1829BT includes a built-in transformer with selectable power taps at 8, 15, 30 and 60 watts to accommodate 70. 7-volt lines. Weather-resistant for outdoor or indoor use, dual 1-inch screw-on exits, wide frequency response. Comes with threaded plug to convert to conventional driver. FC100 Cobreflex IIB Cobreflex III 1829BT 60 watts 280 Hz-8 kHz, ±5 dB 105 dB SPL (*on FC100) 16 ohms 5. 3 dia. (4. 4 kg) 14 To order or for more information call 1-800-685-6386 30-watt explosion proof driver Compatible Horns COMPRESSION DRIVERS 7110XC System Examples ID30 Series 30 watts 500 Hz-4 kHz, ±5 dB 106 dB SPL 8 ohms (ID30C-8) 16 ohms (ID30C-16) 25/70. 7 CV (ID30CT) 4. 2 dia. (2. 0 kg) Cobreflex IIB Cobreflex III 30-watt driver for reentrant horns Compatible Horns ID30CT Surface Mount Speakers ID60DT 60 watts 500 Hz-4 kHz, ±5 dB 107 dB SPL 8 ohms (ID60D-8) 25/70. 7 CV (ID60DT) Cobreflex IIB A 30-watt heavy-duty driver for reentrant horns. Designed for use in applications that require continuous, high-level acoustic output such as high-level public address. Features rugged, weatherresistant phenolic diaphragms, indoor/outdoor packaging, 1-inch screw-on exit and a 25/70. 7-volt transformer with 1. 25-, 2. 5-, 5-, 10-, 15- and 30-watt taps. ID30C-16 Same as ID30CT except without transformer, 16-ohm impedance. ID30C-8 Same as ID30CT except without transformer, 8-ohm impedance. Cobreflex III 60-watt driver for reentrant horns Compatible Horns ID60DT Horns and Drivers Cobreflex IIB A 60-watt heavy-duty driver for reentrant horns. Designed for use in applications that require continuous, high-level acoustic output such as high-level public address. [. . . ] Remote-starting the power amplifier is possible when it is operated on mains supply or on 24 VDC emergency power supply. DPA4140 1 x 400w Remote Control Single Channel Amplifier (requires input module below) The DPA4140 provides 1 x 400 watts output power. When used with the NRS90222 module below, the 4140 also provides extensive system control and monitor functions which support level control, a variety of fault monitors, and signal routing. The electronically balanced input is provided as an XLR-type connector (0 dBu). Remote-starting the power amplifier is possible when it is operated on mains supply or on 24 VDC emergency power supply. DPA4120 1 x 200w Remote Control Single Channel Amplifier (requires input module below) The DPA4140 offers the same features as the 4140 above but with 1 x 200 watts of output power. DPA4260 Input modules NRS90222 NRS90225 Remote input module for DPA4140 or 4120 Standard input module for DPA4140 or 4120 (Non remote) Paging Mics <-80 dB 10 k ohms >100 dB 5. 2 H x 19. 0 W x 13. 6 D (132 H x 483 W x 345 D) 49. 5 lb. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE DM

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE DM will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag