User manual ELECTRO-VOICE FRX+660PI EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE FRX+660PI EDS. We hope that this ELECTRO-VOICE FRX+660PI EDS user guide will be useful to you.
Lastmanuals help download the user guide ELECTRO-VOICE FRX+660PI EDS.
Manual abstract: user guide ELECTRO-VOICE FRX+660PI EDS
Detailed instructions for use are in the User's Guide.
[. . . ] FRX+660/FRX+660PI
15-Inch Two-Way Horn-Loaded 60° x 60° Coaxial Speaker System
· · · · · · · · · Pattern Control to 500 Hz 60° x 60° coverage Built-in L-track rigging Available in black, white and unfinished Passive or bi-amp operation High sensitivity, 105 dB Ring-Mode Decoupling / RMDTM Full Coaxial Design Weatherized Version Available (FRX+660PI)
FRX+ series is designed for applications in highly reverberant spaces where excellent directivity control down to 500 Hz is critical. [. . . ] A 300W line transformer is available as a contractor installed item.
Freq. Range1 (-10 dB): 52Hz-16kHz Max Calculated SPL: 133 dB Horizontal Coverage: 60° Ver tical Coverage: 60° LF Power Handling: 400W Continuous, 1600W Peak HF Power Handling: 60W Continuous, 240W Peak Passive Power Handling: 400W Continuous, 1600W Peak LF Sensitivity (Bi-Amp): 105 dB, 1W/1m HF Sensitivity (Bi-Amp): 109 dB, 1W/1m Passive System 105 dB, 1W/1m Sensitivity: Impedance: 8 ohms (Nominal), 7. 2 ohms (Min. ) LF Transducer : DL15X 15" (381mm) Driver, 8 ohms HF Transducer : DH2t 2" (51mm) Diaphragm Comp. Driver, 8 ohms Passive Crossover 1350 Hz Frequency: Connectors: Two barrier strips Enclosure Material: 13-ply Birch plywood Grille: 16 GA steel (PI Version Stainless Steel) Environmental Spec: IEC 529 IP24, (PI Version IP44) MIL STD 810 Transformer : See Page 4 Dim (H x W x D): 31. 0" x 28. 3" x 26. 0" (787 x 719 x 660 mm) Net Weight (each): 152 lbs (69. 0 kg) Shipping Weight: 157 lbs (71. 2 kg)
Full Space measurement. Half Space use will improve LF response.
FRX+660/FRX+660PI Full Range Loudspeaker
Frequency Response (Full Space): Impedance:
Horizontal Off Axis Frequency Response:
Vertical Off Axis Frequency Response (up/down):
Engineering Data Sheet
Horizontal 1/3 Octave Polars: Vertical 1/3 Octave Polars:
Line Transformer Kit:
Part number 301401-000 transformer kit is available to mount internally to any FRX+ System. The kit includes a special 300 Watt line transformer for operating on 70, 100, and 140 volt distributed line systems, wiring harness, instructions, and hardware. At 300 Watts it has a bandwidth of 35 Hz to 15 kHz ±1dB.
FRX+660 Part Numbers
· · · 301237-000 - Unfinished 301237-001 - Black 301237-002 - White
FRX+660PI Part Numbers
· 301395-001 - Black
Architectural & Engineering Specs:
The loudspeaker system shall be a coaxial, two-way full range design consisting of a 15-inch woofer, a high-frequency compression driver on a molded constant-directivity horn and a dividing network providing an acoustic crossover frequency of 1, 350 Hz. The system shall be configurable in a biamp mode by moving a single connector in the crossover network. The loudspeaker shall meet the following performance criteria; power-handling, 400 watts, based upon ANSI/EIA RS-426-A 1980 standard for full-range loudspeaker systems; frequency response, smooth and usable at high SPL levels from 60 Hz to 15 kHz; pressure sensitivity, 104 dB SPL (passive mode) or 105 dB (LF)/109 dB (HF) in biamp mode for 1W at 1m; impedance, 8 ohms nominal, 7 ohms minimum. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043
www. electrovoice. com
© Telex Communications, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE FRX+660PI EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE FRX+660PI EDS will begin.