User manual ELECTRO-VOICE MA-1206 EDS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE MA-1206 EDS. We hope that this ELECTRO-VOICE MA-1206 EDS user guide will be useful to you.

Lastmanuals help download the user guide ELECTRO-VOICE MA-1206 EDS.


ELECTRO-VOICE MA-1206 EDS : Download the complete user guide (274 Ko)

Manual abstract: user guide ELECTRO-VOICE MA-1206 EDS

Detailed instructions for use are in the User's Guide.

[. . . ] MA-1206 Mixer Amplifier 60-Watt, 12 Input Mixer Amplifier General Description: The Electro-Voice ® MA-1206 is a 60-watt, twelve-input mixer amplifier designed for commercial sound applications. [. . . ] A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier. There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70. 7 or 100 volt distributed systems. at the paging input, it shall automatically mute other input sources. The mixer amplifier shall meet the following performance criteria: output power shall be 60 watts; total harmonic distortion shall be less than 1% at 1 kHz; frequency response shall be within ±3 dB from 50 Hz to 15 kHz; input impedance shall be 600ohms (balanced inputs) or 47 kW (unbalanced inputs); nominal load impedance shall be 4-, 8- or 16-ohms for voicecoil-connected loudspeakers, 25, 70. 7 or 100-volt nominal transformer windings for the constant-voltage output. In addition to a preamplifier output/power amplifier input link, there shall also be a line-level balanced XLR output. The mixer amplifier shall operate from either a standard 120 V ac 50/60 Hz or a 24V dc power source , and measure 13. 3 cm (5. 2 in. ) high x 48. 0 cm (18. 9 in. ) wide x 32. 0 cm (12. 6 in. ) deep. The mixer amplifier shall be the Electro-Voice ® Model MA-1206. Architects' and Engineers' Specifications: The mixer amplifier shall have twelve input channels, with individual mix gain controls. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE MA-1206 EDS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE MA-1206 EDS will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag