User manual ELECTRO-VOICE MA-1212 EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ELECTRO-VOICE MA-1212 EDS. We hope that this ELECTRO-VOICE MA-1212 EDS user guide will be useful to you.
Lastmanuals help download the user guide ELECTRO-VOICE MA-1212 EDS.
Manual abstract: user guide ELECTRO-VOICE MA-1212 EDS
Detailed instructions for use are in the User's Guide.
[. . . ] MA-1212 Mixer Amplifier
120-Watt, 12 Input Mixer Amplifier
The Electro-Voice ® MA-1212 is a 120-watt, twelve-input mixer amplifier designed for commercial sound applications. [. . . ] A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier. There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70. 7 or 100 volt distributed systems.
at the paging input, it shall automatically mute other input sources. The mixer amplifier shall meet the following performance criteria: output power shall be 120 watts; total harmonic distortion shall be less than 1% at 1 kHz; frequency response shall be within ±3 dB from 50 Hz to 15 kHz; input impedance shall be 600-ohms (balanced inputs) or 47 kW (unbalanced inputs); nominal load impedance shall be 4-, 8- or 16-ohms for voicecoil-connected loudspeakers, 25, 70. 7 or 100-volt nominal transformer windings for the constant-voltage output. In addition to a preamplifier output/power amplifier input link, there shall also be a line-level balanced XLR output. The mixer amplifier shall operate from either a standard 120 V ac 50/60 Hz or a 24V dc power source, and measure 13. 3 cm (5. 2 in. ) high x 48. 0 cm (18. 9 in. ) wide x 32. 0 cm (12. 6 in. ) deep. The mixer amplifier shall be the Electro-Voice ® Model MA-1212.
Architects' and Engineers' Specifications:
The mixer amplifier shall have twelve input channels, with individual mix gain controls. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE MA-1212 EDS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE MA-1212 EDS will begin.