User manual ELECTRO-VOICE PLASMA PSA-V

[. . . ] Figure 1 shows the PSA-V with optional truss clamp (part number D112941), Figure 2 shows the arm installed on a Plasma P1. [. . . ] Safety Pin Locking Knob Truss Clamp Insert Spigot into Truss Clamp Spigot Each P1 has three L-tracks embedded, one on the top, one on the bottom, and one on the flat side. Each L-track has a threaded hole in the center, this threaded hole is used to mount the PSA-V as shown in Figure 3. Align the PSA-V's threaded shaft with the L-track's threaded hole and carefully screw it in. the knob can now be hand tightened to position the P1 at the angle desired. If used with the optional truss clamp carefully insert the spigot into the truss clamp as shown in Figure 4 and insert the safety pin. Make sure to push the safety pin all the way in and bend the tip over to secure it in place. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]